관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
| 분야 | TC 3 : Documentation, graphical symbols and representations of technical information |
|---|---|
| 적용범위 | IEC 60445:2021 applies to the identification and marking of terminals of electrical equipment such as resistors, fuses, relays, contactors, transformers, rotating machines and, wherever applicable, to combinations of such equipment (e.g. assemblies), and also applies to the identification of terminations of certain designated conductors. It also provides general rules for the use of certain colours or alphanumeric notations to identify conductors with the aim of avoiding ambiguity and ensuring safe operation. These conductor colours or alphanumeric notations are intended to be applied in cables or cores, busbars, electrical equipment and installations. This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. It has the status of a basic safety publication in accordance with IEC Guide 104. IEC 60445:2021 cancels and replaces the sixth edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the definitions have been aligned with IEC 60050-195:2021 and IEC 60050-826; b) the provisions for colour to be used for identification of certain designated conductors are made requirements and not only recommendations; c) introduction of a new subclause on marking of protective terminals for multiple power supply inputs on equipment. |
| 국제분류(ICS)코드 |
13.110 : 기계 안전성
29.020 : 전기 공학 일반 01.080.20 : 특정 기기용 도표기호 |
| 페이지수 | 53 |
| Edition | 7.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60445:2021 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors | 2021-07-16 | 표준 |
| 2 | IEC 60445:2021 RLV | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors | 2021-07-16 | 표준 |
| 3 | IEC 60445:2017/COR1:2017 | Corrigendum 1 - Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors | 2017-11-07 | 구판 |
| 4 | IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors | 2017-08-04 | 구판 |
| 5 | IEC 60445:2017 RLV | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors | 2017-08-04 | 구판 |
| 6 | IEC 60445:2010 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors | 2010-08-27 | 구판 |
| 7 | IEC 60445:2006 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and conductor terminations | 2006-11-24 | 구판 |
| 8 | IEC 60445:1999/COR1:2002 | corrigendum 1 - Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system | 2002-07-05 | 구판 |
| 9 | IEC 60445:1999 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system | 1999-10-29 | 구판 |
| 10 | IEC 60445:1988 | Identification of equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system | 1988-11-28 | 구판 |
| 11 | IEC 60445:1973/AMD1:1980 | Amendment 1 - Identification of apparatus terminals and general rules for a uniform system of terminal marking, using an alphanumerci notation | 1980-04-01 | 구판 |
| 12 | IEC 60445:1973/COR1:1974 | Corrigendum 1 - Identification of apparatus terminals and general rules for a uniform system of terminal marking, using an alphanumeric notation | 1974-12-01 | 구판 |
| 13 | IEC 60445:1973 | Identification of equipment terminals and of terminations of certain designated conductors, including general rules of an alphanumeric system | 1973-01-01 | 구판 |
관련상품이 존재하지 않습니다.
IEC 61076-2-101:2012 - Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking 상세보기
IEC 60811-512:2012 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature 상세보기
IEC 60811-405:2012 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths 상세보기
IEC 60794-3-11:2010 - Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried, and lashed aerial single-mode optical fibre telecommunication cables 상세보기
IEC 60060-2:2010 - High-voltage test techniques - Part 2: Measuring systems 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
