관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
High-voltage test techniques - Part 2: Measuring systems
| 분야 | TC 42 : High-voltage and high-current test techniques |
|---|---|
| 적용범위 | IEC 60060-2:2010 is applicable to complete measuring systems, and to their components, used for the measurement of high voltages during laboratory and factory tests with direct voltage, alternating voltage and lightning and switching impulse voltages as specified in IEC 60060-1. For measurements during on-site tests see IEC 60060-3. The limits on uncertainties of measurements stated in this standard apply to test levels stated in IEC 60071-1:2006. The principles of this standard apply also to higher levels but the uncertainty may be greater. This standard also defines the terms used, methods to estimate the uncertainties of high-voltage measurements, states the requirements which the measuring systems shall meet, describes the methods for approving a measuring system and checking its components and describes the procedures by which the user shall show that a measuring system meets the requirements of this standard, including the limits set for the uncertainty of measurement. This third edition cancels and replaces the second edition, published in 1994, and constitutes a technical revision. The significant technical changes with respect to the previous edition are as follows: - The general layout and text was updated and improved to make the standard easier to use. - The standard was revised to align it with IEC 60060-1. - The treatment of measurement uncertainty estimation has been expanded. |
| 국제분류(ICS)코드 |
17.220.20 : 전기 및 자기량 측정
19.080 : 전기 및 전자 시험 및 측정기구 |
| 페이지수 | 149 |
| Edition | 3.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60060-2:2010 | High-voltage test techniques - Part 2: Measuring systems | 2010-11-29 | 표준 |
| 2 | IEC 60060-2:1994/AMD1:1996 | Amendment 1 - High voltage test techniques - Part 2: Measuring systems | 1996-03-13 | 구판 |
| 3 | IEC 60060-2:1994 | High voltage test techniques - Part 2: Measuring systems | 1994-11-23 | 구판 |
| 4 | IEC 60060-2:1973/COR1:1973 | Corrigendum 1 - High-voltage test techniques - Part 2: Test procedures | 1973-01-01 | 구판 |
| 5 | IEC 60060-2:1973 | High-voltage test techniques - Part 2: Test procedures | 1973-01-01 | 구판 |
IEC 60060-3:1976 - High-voltage test techniques - Part 3: Measuring devices 상세보기
IEC 60060-4:1977 - High-voltage test techniques - Part 4: Application guide for measuring devices 상세보기
IEC 60060-3:2006 - High-voltage test techniques - Part 3: Definitions and requirements for on-site testing 상세보기
IEC 60060-1:2010 - High-voltage test techniques - Part 1: General definitions and test requirements 상세보기
IEC 60060-3:2006 - High-voltage test techniques - Part 3: Definitions and requirements for on-site testing 상세보기
IEC 60060-1:2010 - High-voltage test techniques - Part 1: General definitions and test requirements 상세보기
IEC 60076-5:2006 - Power transformers - Part 5: Ability to withstand short circuit 상세보기
IEC 60076-2:2011 - Power transformers - Part 2: Temperature rise for liquid-immersed transformers 상세보기
IEC 60137:2017 - Insulated bushings for alternating voltages above 1000 V 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
