관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
| 분야 | |
|---|---|
| 적용범위 | IEC 60445:2017 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 60445:2017 applies to the identification and marking of terminals of electrical equipment such as resistors, fuses, relays, contactors, transformers, rotating machines and, wherever applicable, to combinations of such equipment (e.g. assemblies), and also applies to the identification of terminations of certain designated conductors. It also provides general rules for the use of certain colours or alphanumeric notations to identify conductors with the aim of avoiding ambiguity and ensuring safe operation. These conductor colours or alphanumeric notations are intended to be applied in cables or cores, busbars, electrical equipment and installations. This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. It has the status of a basic safety publication in accordance with IEC Guide 104. This sixth edition cancels and replaces the fifth edition of IEC 60445, published in 2010. This edition includes the following significant technical changes with respect to the previous edition: a) the text of the introduction has been moved into the scope in accordance with IEC Guide 104; b) colour codes for the identification of line conductors of DC systems; c) colour code for the identification of functional earthing conductor; d) update of Table A.1with colour codes for DC line conductors; e) conversion of notes containing non-mandatory requirements to normative text; f) the terminology is aligned with IEC 60050-195. The contents of the corrigendum of November 2017 have been included in this copy. |
| 국제분류(ICS)코드 |
13.110 : 기계 안전성
29.020 : 전기 공학 일반 01.080.20 : 특정 기기용 도표기호 |
| 페이지수 | 78 |
| Edition | 6.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60445:2021 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors | 2021-07-16 | 표준 |
| 2 | IEC 60445:2021 RLV | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors | 2021-07-16 | 표준 |
| 3 | IEC 60445:2017/COR1:2017 | Corrigendum 1 - Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors | 2017-11-07 | 구판 |
| 4 | IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors | 2017-08-04 | 구판 |
| 5 | IEC 60445:2017 RLV | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors | 2017-08-04 | 구판 |
| 6 | IEC 60445:2010 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors | 2010-08-27 | 구판 |
| 7 | IEC 60445:2006 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and conductor terminations | 2006-11-24 | 구판 |
| 8 | IEC 60445:1999/COR1:2002 | corrigendum 1 - Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system | 2002-07-05 | 구판 |
| 9 | IEC 60445:1999 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system | 1999-10-29 | 구판 |
| 10 | IEC 60445:1988 | Identification of equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system | 1988-11-28 | 구판 |
| 11 | IEC 60445:1973/AMD1:1980 | Amendment 1 - Identification of apparatus terminals and general rules for a uniform system of terminal marking, using an alphanumerci notation | 1980-04-01 | 구판 |
| 12 | IEC 60445:1973/COR1:1974 | Corrigendum 1 - Identification of apparatus terminals and general rules for a uniform system of terminal marking, using an alphanumeric notation | 1974-12-01 | 구판 |
| 13 | IEC 60445:1973 | Identification of equipment terminals and of terminations of certain designated conductors, including general rules of an alphanumeric system | 1973-01-01 | 구판 |
관련상품이 존재하지 않습니다.
BS EN 1092-1:2018 - Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Steel flanges. 상세보기
BS EN 13480-1:2017+A1:2019 - Metallic industrial piping. General. 상세보기
BS 7671:2018+A3:2024 - SET - Requirements for Electrical Installations. IET Wiring Regulations. 상세보기
MSS SP 58 2018 Edition - Pipe Hangers and Supports - Materials, Design, Manufacture, Selection, Application, and Installation 상세보기
IEEE 693-2018 - IEEE Recommended Practice for Seismic Design of Substations 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
