관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)
| 분야 | |
|---|---|
| 적용범위 | 1.1?This test method is used to determine the passage of airborne bacteria through porous materials intended for use in packaging sterile medical devices. This test method is designed to test materials under conditions that result in the detectable passage of bacterial spores through the test material. 1.1.1?A round-robin study was conducted with eleven laboratories participating. Each laboratory tested duplicate samples of six commercially available porous materials to determine the Log Reduction Value (LRV) (see calculation in Section 12). Materials tested under the standard conditions described in this test method returned average values that range from LRV 1.7 to 4.3. 1.1.2?Results of this round-robin study indicate that caution should be used when comparing test data and ranking materials, especially when a small number of sample replicates are used. In addition, further collaborative work (such as described in Practice E691) should be conducted before this test method would be considered adequate for purposes of setting performance standards. 1.2?This test method requires manipulation of microorganisms and should be performed only by trained personnel. The U.S. Department of Health and Human Services publication Biosafety in Microbiological and Biomedical Laboratories (CDC/NIH-HHS Publication No. 84-8395) should be consulted for guidance. 1.3?The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | |
| 페이지수 | 9 |
| Edition | 21 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM F1608-21 | Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method) | 2021-10-01 | 표준 |
| 2 | ASTM F1608-21 REDLINE | Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method) | 2021-10-01 | 표준 |
| 3 | ASTM F1608-16 | Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method) | 2016-05-01 | 구판 |
| 4 | ASTM F1608-16 REDLINE | Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method) | 2016-05-01 | 구판 |
| 5 | ASTM F1608-00(2009) | Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method) | 2009-10-01 | 구판 |
| 6 | ASTM F1608-00(2004) | Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method) | 2004-10-01 | 구판 |
| 7 | ASTM F1608-00 | Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method) | 2000-04-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM D4169-22 REDLINE - Standard Practice for Performance Testing of Shipping Containers and Systems 상세보기
ASTM F1980-21 REDLINE - Standard Guide for Accelerated Aging of Sterile Barrier Systems and Medical Devices 상세보기
ASTM D882-18 REDLINE - Standard Test Method for Tensile Properties of Thin Plastic Sheeting 상세보기
ASTM F1929-15 REDLINE - Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration 상세보기
ASTM F1140/F1140M-13 REDLINE - Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
