관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
| 분야 | |
|---|---|
| 적용범위 | 1.1 This test method defines materials and procedures that will detect and locate a leak equal to or greater than a channel formed by a 50 µm (0.002 in.) wire in package edge seals formed between a transparent material and a porous sheet material. A dye penetrant solution is applied locally to the seal edge to be tested for leaks. After contact with the dye penetrant for a specified time, the package is visually inspected for dye penetration. 1.2 Three dye application methods are covered in this test method: injection, edge dip, and eyedropper. 1.3 These test methods are intended for use on packages with edge seals formed between a transparent material and a porous sheet material. The test methods are limited to porous materials which can retain the dye penetrant solution and prevent it from discoloring the seal area for a minimum of 5 seconds. Uncoated papers are especially susceptible to leakage and must be evaluated carefully for use with each test method. 1.4 These test methods require that the dye penetrant solution have good contrast to the opaque packaging material. 1.5 The values are stated in International System of Units (SI units) and English units. Either is to be regarded as standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
| 국제분류(ICS)코드 | |
| 페이지수 | 6 |
| Edition | 15 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM F1929-23 | Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration | 2023-11-15 | 표준 |
| 2 | ASTM F1929-23 REDLINE | Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration | 2023-11-15 | 표준 |
| 3 | ASTM F1929-15 | Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration | 2015-10-01 | 구판 |
| 4 | ASTM F1929-15 REDLINE | Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration | 2015-10-01 | 구판 |
| 5 | ASTM F1929-12 | Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration | 2012-11-01 | 구판 |
| 6 | ASTM F1929-98(2004) | Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration | 2004-06-01 | 구판 |
| 7 | ASTM F1929-98 | Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration | 1998-11-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM F88/F88M-15 REDLINE - Standard Test Method for Seal Strength of Flexible Barrier Materials 상세보기
ISO 15223-1:2021 - Medical devices — Symbols to be used with information to be supplied by the manufacturer — Part 1: General requirements 상세보기
ASTM F1140/F1140M-13(2020)e1 - Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages 상세보기
ISO 2859-1:1999/Amd 1:2011 - Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection — Amendment 1 상세보기
ISO 11607-1:2019 - Packaging for terminally sterilized medical devices — Part 1: Requirements for materials, sterile barrier systems and packaging systems 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
