관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
| 분야 | 01.01 : 철강-배관, 튜브, 관이음쇠 |
|---|---|
| 적용범위 | 1.1?This specification2 covers several grades of carbon and low-alloy steel forged or ring-rolled flanges, forged fittings and valves intended primarily for low-temperature service and requiring notch toughness testing. They are made to specified dimensions, or to dimensional standards, such as the ASME and API Specifications referenced in Section 2. Although this specification covers some piping components machined from rolled bar and seamless tubular materials (see 5.3.3), it does not cover raw material produced in these product forms. 1.2?No limitation on size is intended beyond the ability of the manufacturer to obtain the specified requirements. However, Class 3 of Grade LF787 is only available in the quenched-and-precipitation heat treated condition. 1.3?Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified by the purchaser in the order. 1.4?This specification is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units. 1.5?The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.6?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 23.040.40 : 금속 조립품 |
| 페이지수 | 10 |
| Edition | 24 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A350/A350M-24b | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2024-10-15 | 표준 |
| 2 | ASTM A350/A350M-24b REDLINE | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2024-10-15 | 표준 |
| 3 | ASTM A350/A350M-24a | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2024-05-01 | 구판 |
| 4 | ASTM A350/A350M-24 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2024-03-01 | 표준 |
| 5 | ASTM A350/A350M-24 REDLINE | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2024-03-01 | 표준 |
| 6 | ASTM A350/A350M-23 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2023-05-01 | 구판 |
| 7 | ASTM A350/A350M-23 REDLINE | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2023-05-01 | 구판 |
| 8 | ASTM A350/A350M-18 REDLINE | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2018-05-01 | 구판 |
| 9 | ASTM A350/A350M-18 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2018-05-01 | 구판 |
| 10 | ASTM A350/A350M-17 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2017-09-01 | 구판 |
| 11 | ASTM A350/A350M-15 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2015-05-01 | 구판 |
| 12 | ASTM A350/A350M-14 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2014-10-01 | 구판 |
| 13 | ASTM A350/A350M-13 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2013-10-01 | 구판 |
| 14 | ASTM A350/A350M-12 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2012-03-01 | 구판 |
| 15 | ASTM A350/A350M-11 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2011-10-01 | 구판 |
| 16 | ASTM A350/A350M-10 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2010-11-01 | 구판 |
| 17 | ASTM A350/A350M-07 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2007-11-01 | 구판 |
| 18 | ASTM A350/A350M-04a | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2004-10-01 | 구판 |
| 19 | ASTM A350/A350M-04 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2004-03-01 | 구판 |
| 20 | ASTM A350/A350M-02b | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2002-09-10 | 구판 |
| 21 | ASTM A350/A350M-02a | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2002-06-10 | 구판 |
| 22 | ASTM A350/A350M-00c | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2002-03-10 | 구판 |
| 23 | ASTM A350/A350M-00b | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2002-03-10 | 구판 |
| 24 | ASTM A350/A350M-02 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 2002-03-10 | 구판 |
| 25 | ASTM A350/A350M-97 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | 구판 |
관련상품이 존재하지 않습니다.
ASTM A105/A105M-24 - Standard Specification for Carbon Steel Forgings for Piping Applications 상세보기
ASTM A266/A266M-24 - Standard Specification for Carbon Steel Forgings for Pressure Vessel Components 상세보기
ASTM E8/E8M-24 - Standard Test Methods for Tension Testing of Metallic Materials 상세보기
ASTM A484/A484M-24 - Standard Specification for General Requirements for Stainless Steel Bars, Billets, Shapes, and Forgings 상세보기
ASTM A276/A276M-24 - Standard Specification for Stainless Steel Bars and Shapes 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
