관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Specification for Stainless Steel Bars and Shapes
| 분야 | 01.03 : 철강-강판, 강대 및 강선 |
|---|---|
| 적용범위 | 1.1?This specification covers hot-finished or cold-finished bars except bars for reforging (Note 1). It includes rounds, squares, and hexagons, and hot-rolled or extruded shapes, such as angles, tees, and channels in the more commonly used types of stainless steels. The free-machining types (Note 2) for general corrosion resistance and high-temperature service are covered in a separate specification. Note 1:?For bars for reforging, see Specification A314. Note 2:?For free-machining stainless bars designed especially for optimum machinability, see Specification A582/A582M. Note 3:?There are standards covering high nickel, chromium, austenitic corrosion, and heat-resisting alloy materials. These standards are under the jurisdiction of ASTM Subcommittee B02.07 and may be found in Annual Book of ASTM Standards, Vol. 02.04. 1.2?The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. 1.3?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 |
77.140.70 : 강재 형상
77.140.20 : 고품질 강 77.140.60 : 봉강류 |
| 페이지수 | 9 |
| Edition | 24 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A276/A276M-24 | Standard Specification for Stainless Steel Bars and Shapes | 2024-01-01 | 표준 |
| 2 | ASTM A276/A276M-24 REDLINE | Standard Specification for Stainless Steel Bars and Shapes | 2024-01-01 | 표준 |
| 3 | ASTM A276/A276M-23 | Standard Specification for Stainless Steel Bars and Shapes | 2023-08-01 | 구판 |
| 4 | ASTM A276/A276M-17 REDLINE | Standard Specification for Stainless Steel Bars and Shapes | 2017-03-15 | 표준 |
| 5 | ASTM A276/A276M-17 | Standard Specification for Stainless Steel Bars and Shapes | 2017-03-15 | 표준 |
| 6 | ASTM A276/A276M-16a | Standard Specification for Stainless Steel Bars and Shapes | 2016-05-01 | 구판 |
| 7 | ASTM A276/A276M-16 | Standard Specification for Stainless Steel Bars and Shapes | 2016-01-01 | 구판 |
| 8 | ASTM A276/A276M-15 | Standard Specification for Stainless Steel Bars and Shapes | 2015-01-01 | 구판 |
관련상품이 존재하지 않습니다.
ASTM E8/E8M-24 - Standard Test Methods for Tension Testing of Metallic Materials 상세보기
ASTM A564/A564M-19a - Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes 상세보기
ASTM F899-23 - Standard Specification for Wrought Stainless Steels for Surgical Instruments 상세보기
ASTM F2026-17 - Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications 상세보기
ASTM F138-19 - Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
