관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Specification for Wrought Stainless Steels for Surgical Instruments
| 분야 | 13.01 : 의료기, 외과용 도구 및 장비 |
|---|---|
| 적용범위 | 1.1?This specification covers the chemistry requirements for wrought stainless steels used for the manufacture of surgical instruments. The data contained in Tables 1-4 of this specification, including typical hardness values, common heat treating cycles, and examples of selected stainless steels that have been used for surgical instruments, is provided for reference only. Mechanical property requirements, heat treating requirements, hardness requirements, and all other requirements except chemistry are governed by the appropriate material standards as referenced below or as agreed upon between the purchaser and supplier. 1.2?The SI units in this standard are the primary units. The values stated in either primary SI units or secondary inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of each other. Combining values from the two systems may result in nonconformance with the standard. 1.3?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 11.040.30 : 외과장비 |
| 페이지수 | 8 |
| Edition | 23 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM F899-23 | Standard Specification for Wrought Stainless Steels for Surgical Instruments | 2023-11-01 | 표준 |
| 2 | ASTM F899-23 REDLINE | Standard Specification for Wrought Stainless Steels for Surgical Instruments | 2023-11-01 | 표준 |
| 3 | ASTM F899-20 | Standard Specification for Wrought Stainless Steels for Surgical Instruments | 2020-02-01 | 구판 |
| 4 | ASTM F899-20 REDLINE | Standard Specification for Wrought Stainless Steels for Surgical Instruments | 2020-02-01 | 구판 |
| 5 | ASTM F899-19 | Standard Specification for Wrought Stainless Steels for Surgical Instruments | 2019-09-15 | 구판 |
| 6 | ASTM F899-12b REDLINE | Standard Specification for Wrought Stainless Steels for Surgical Instruments | 2012-12-01 | 표준 |
| 7 | ASTM F899-12b | Standard Specification for Wrought Stainless Steels for Surgical Instruments | 2012-12-01 | 표준 |
| 8 | ASTM F899-12a | Standard Specification for Wrought Stainless Steels for Surgical Instruments | 2012-11-01 | 구판 |
| 9 | ASTM F899-12 | Standard Specification for Wrought Stainless Steels for Surgical Instruments | 2012-06-01 | 구판 |
| 10 | ASTM F899-11 | Standard Specification for Wrought Stainless Steels for Surgical Instruments | 2011-03-01 | 구판 |
| 11 | ASTM F899-10 | Standard Specification for Wrought Stainless Steels for Surgical Instruments | 2010-12-01 | 구판 |
| 12 | ASTM F899-09e1 | Standard Specification for Wrought Stainless Steels for Surgical Instruments | 2009-02-01 | 구판 |
| 13 | ASTM F899-09 | Standard Specification for Wrought Stainless Steels for Surgical Instruments | 2009-02-01 | 구판 |
| 14 | ASTM F899-07 | Standard Specification for Wrought Stainless Steels for Surgical Instruments | 2007-02-01 | 구판 |
| 15 | ASTM F899-95 | Standard Specification for Stainless Steel for Surgical Instruments | 2002-04-10 | 구판 |
| 16 | ASTM F899-02 | Standard Specification for Stainless Steel for Surgical Instruments | 2002-04-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM A276/A276M-24 - Standard Specification for Stainless Steel Bars and Shapes 상세보기
ASTM A564/A564M-19a - Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes 상세보기
ASTM F2759-19 - Standard Guide for Assessment of the Ultra-High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices 상세보기
ASTM F2346-18 - Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs 상세보기
ASTM F2026-17 - Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
