ASTM A312/A312M-22a Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.

PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)

PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

구판 판매

ASTM A312/A312M-22a

Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

- 발행일 : 2022-11-01
- 발행기관 : ASTM

언어	제공형태	판매가격	선택
영어	PDF	141,700원
영어	PRINT	141,700원

장바구니 담기

상품이 장바구니에 담겼습니다.

장바구니로 이동

상세정보

분야	01.01 : 철강-배관, 튜브, 관이음쇠
적용범위	1.1?This specification2 covers seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service. 1.2?Grades TP304H, TP309H, TP309HCb, TP310H, TP310HCb, TP316H, TP321H, TP347H, and TP348H are modifications of Grades TP304, TP309Cb, TP309S, TP310Cb, TP310S, TP316, TP321, TP347, and TP348, and are intended for service at temperatures where creep and stress rupture properties are important. 1.3?Optional supplementary requirements are provided for pipe where a greater degree of testing is desired. These supplementary requirements call for additional tests to be made and, when desired, it is permitted to specify in the order one or more of these supplementary requirements. 1.4?Table X1.1 lists the standardized dimensions of welded and seamless stainless steel pipe as shown in ASME B36.19. These dimensions are also applicable to heavily cold worked pipe. Pipe having other dimensions is permitted to be ordered and furnished provided such pipe complies with all other requirements of this specification. 1.5?Grades TP321 and TP321H have lower strength requirements for pipe manufactured by the seamless process in nominal wall thicknesses greater than ³/₈?in. [9.5 mm]. 1.6?The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. Note 1:?The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as “nominal diameter,” “size,” and “nominal size.” 1.7?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
국제분류(ICS)코드	23.040.10 : 주철 및 강 파이프
페이지수	13
Edition	22a

이력정보

No.	표준번호	표준명	발행일	상태
1	ASTM A312/A312M-24b	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2024-10-15	표준
2	ASTM A312/A312M-24b REDLINE	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2024-10-15	표준
3	ASTM A312/A312M-24a REDLINE	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2024-05-01	구판
4	ASTM A312/A312M-24a	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2024-05-01	구판
5	ASTM A312/A312M-24	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2024-03-01	구판
6	ASTM A312/A312M-24 REDLINE	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2024-03-01	구판
7	ASTM A312/A312M-22a REDLINE	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2022-11-01	구판
8	ASTM A312/A312M-22a	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2022-11-01	구판
9	ASTM A312/A312M-22	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2022-05-01	구판
10	ASTM A312/A312M-22 REDLINE	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2022-05-01	구판
11	ASTM A312/A312M-21 REDLINE	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2021-05-01	구판
12	ASTM A312/A312M-21	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2021-05-01	구판
13	ASTM A312/A312M-19	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2019-11-01	구판
14	ASTM A312/A312M-19 REDLINE	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2019-11-01	구판
15	ASTM A312/A312M-18a	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2018-11-01	구판
16	ASTM A312/A312M-18a REDLINE	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2018-11-01	구판
17	ASTM A312/A312M-18	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2018-09-01	구판
18	ASTM A312/A312M-17	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2017-03-15	구판
19	ASTM A312/A312M-16a	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2016-09-01	구판
20	ASTM A312/A312M-16	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2016-01-01	구판
21	ASTM A312/A312M-15b	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2015-11-01	구판
22	ASTM A312/A312M-15a	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2015-09-01	구판
23	ASTM A312/A312M-15	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2015-03-01	구판
24	ASTM A312/A312M-14b	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2014-11-01	구판
25	ASTM A312/A312M-14a	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2014-10-01	구판
26	ASTM A312/A312M-14	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2014-03-01	구판
27	ASTM A312/A312M-13b	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2013-10-01	구판
28	ASTM A312/A312M-13a	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2013-05-01	구판
29	ASTM A312/A312M-13	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2013-04-01	구판
30	ASTM A312/A312M-12a	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2012-09-01	구판
31	ASTM A312/A312M-12	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2012-04-01	구판
32	ASTM A312/A312M-11	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2011-04-01	구판
33	ASTM A312/A312M-09	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2009-05-15	구판
34	ASTM A312/A312M-08a	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2008-10-01	구판
35	ASTM A312/A312M-08	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2008-03-01	구판
36	ASTM A312/A312M-07	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2007-09-01	구판
37	ASTM A312/A312M-06	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2006-05-01	구판
38	ASTM A312/A312M-05a	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2005-10-01	구판
39	ASTM A312/A312M-05	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2005-03-01	구판
40	ASTM A312/A312M-04b	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2004-09-01	구판
41	ASTM A312/A312M-04a	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2004-05-01	구판
42	ASTM A312/A312M-04	Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes	2004-03-01	구판
43	ASTM A312/A312M-03	Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes	2003-09-10	구판
44	ASTM A312/A312M-02	Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes	2002-11-10	구판
45	ASTM A312/A312M-01	Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes	2001-09-10	구판
46	ASTM A312/A312M-01a	Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes	2001-09-10	구판
47	ASTM A312/A312M-00c	Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes	2001-09-10	구판
48	ASTM A312/A312M-95ae1	Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes		구판

관련상품

관련상품이 존재하지 않습니다.
다른 사람이 함께 구입한 상품

ASTM A240/A240M-22b - Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 상세보기

ASTM A530/A530M-18 - Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe 상세보기

ASTM E1269-11(2018) - Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry 상세보기

ASTM D790-17 - Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials 상세보기

ASTM D695-15 - Standard Test Method for Compressive Properties of Rigid Plastics 상세보기
추천 상품

IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기

IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기

KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기

KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기

KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기

해외표준

ASTM A312/A312M-22a

상세정보

이력정보

관련상품

다른 사람이 함께 구입한 상품

추천 상품

전체서비스 보기