관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
| 분야 | |
|---|---|
| 적용범위 | 1.1 This specification2 covers seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service. Note 1: When the impact test criterion for a low-temperature service would be 15 ft·lbf [20 J] energy absorption or 15 mils [0.38 mm] lateral expansion, some of the austenitic stainless steel grades covered by this specification are accepted by certain pressure vessel or piping codes without the necessity of making the actual test. For example, Grades TP304, TP304L, and TP347 are accepted by the ASME Pressure Vessel Code, Section VIII Division 1, and by the Chemical Plant and Refinery Piping Code, ASME B31.3, for service at temperatures as low as −425 °F [−250 °C] without qualification by impact tests. Other AISI stainless steel grades are usually accepted for service temperatures as low as −325 °F [−200 °C] without impact testing. Impact testing may, under certain circumstances, be required. For example, materials with chromium or nickel content outside the AISI ranges, and for material with carbon content exceeding 0.10 %, are required to be impact tested under the rules of ASME Section VIII Division 1 when service temperatures are lower than −50 °F [−45 °C]. 1.2 Grades TP304H, TP309H, TP309HCb, TP310H, TP310HCb, TP316H, TP321H, TP347H, and TP348H are modifications of Grades TP304, TP309Cb, TP309S, TP310Cb, TP310S, TP316, TP321, TP347, and TP348, and are intended for service at temperatures where creep and stress rupture properties are important. 1.3 Optional supplementary requirements are provided for pipe where a greater degree of testing is desired. These supplementary requirements call for additional tests to be made and, when desired, it is permitted to specify in the order one or more of these supplementary requirements. 1.4 Table X1.1 lists the standardized dimensions of welded and seamless stainless steel pipe as shown in ASME B36.19. These dimensions are also applicable to heavily cold worked pipe. Pipe having other dimensions is permitted to be ordered and furnished provided such pipe complies with all other requirements of this specification. 1.5 Grades TP321 and TP321H have lower strength requirements for pipe manufactured by the seamless process in nominal wall thicknesses greater than 3/8 in. [9.5 mm]. 1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. Note 2: The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as “nominal diameter,” “size,” and “nominal size.” 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | |
| 페이지수 | 13 |
| Edition | 19 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A312/A312M-24b | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2024-10-15 | 표준 |
| 2 | ASTM A312/A312M-24b REDLINE | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2024-10-15 | 표준 |
| 3 | ASTM A312/A312M-24a REDLINE | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2024-05-01 | 구판 |
| 4 | ASTM A312/A312M-24a | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2024-05-01 | 구판 |
| 5 | ASTM A312/A312M-24 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2024-03-01 | 구판 |
| 6 | ASTM A312/A312M-24 REDLINE | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2024-03-01 | 구판 |
| 7 | ASTM A312/A312M-22a REDLINE | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2022-11-01 | 구판 |
| 8 | ASTM A312/A312M-22a | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2022-11-01 | 구판 |
| 9 | ASTM A312/A312M-22 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2022-05-01 | 구판 |
| 10 | ASTM A312/A312M-22 REDLINE | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2022-05-01 | 구판 |
| 11 | ASTM A312/A312M-21 REDLINE | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2021-05-01 | 구판 |
| 12 | ASTM A312/A312M-21 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2021-05-01 | 구판 |
| 13 | ASTM A312/A312M-19 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2019-11-01 | 구판 |
| 14 | ASTM A312/A312M-19 REDLINE | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2019-11-01 | 구판 |
| 15 | ASTM A312/A312M-18a | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2018-11-01 | 구판 |
| 16 | ASTM A312/A312M-18a REDLINE | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2018-11-01 | 구판 |
| 17 | ASTM A312/A312M-18 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2018-09-01 | 구판 |
| 18 | ASTM A312/A312M-17 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2017-03-15 | 구판 |
| 19 | ASTM A312/A312M-16a | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2016-09-01 | 구판 |
| 20 | ASTM A312/A312M-16 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2016-01-01 | 구판 |
| 21 | ASTM A312/A312M-15b | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2015-11-01 | 구판 |
| 22 | ASTM A312/A312M-15a | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2015-09-01 | 구판 |
| 23 | ASTM A312/A312M-15 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2015-03-01 | 구판 |
| 24 | ASTM A312/A312M-14b | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2014-11-01 | 구판 |
| 25 | ASTM A312/A312M-14a | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2014-10-01 | 구판 |
| 26 | ASTM A312/A312M-14 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2014-03-01 | 구판 |
| 27 | ASTM A312/A312M-13b | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2013-10-01 | 구판 |
| 28 | ASTM A312/A312M-13a | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2013-05-01 | 구판 |
| 29 | ASTM A312/A312M-13 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2013-04-01 | 구판 |
| 30 | ASTM A312/A312M-12a | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2012-09-01 | 구판 |
| 31 | ASTM A312/A312M-12 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2012-04-01 | 구판 |
| 32 | ASTM A312/A312M-11 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2011-04-01 | 구판 |
| 33 | ASTM A312/A312M-09 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2009-05-15 | 구판 |
| 34 | ASTM A312/A312M-08a | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2008-10-01 | 구판 |
| 35 | ASTM A312/A312M-08 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2008-03-01 | 구판 |
| 36 | ASTM A312/A312M-07 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2007-09-01 | 구판 |
| 37 | ASTM A312/A312M-06 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2006-05-01 | 구판 |
| 38 | ASTM A312/A312M-05a | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2005-10-01 | 구판 |
| 39 | ASTM A312/A312M-05 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2005-03-01 | 구판 |
| 40 | ASTM A312/A312M-04b | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2004-09-01 | 구판 |
| 41 | ASTM A312/A312M-04a | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | 2004-05-01 | 구판 |
| 42 | ASTM A312/A312M-04 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes | 2004-03-01 | 구판 |
| 43 | ASTM A312/A312M-03 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes | 2003-09-10 | 구판 |
| 44 | ASTM A312/A312M-02 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes | 2002-11-10 | 구판 |
| 45 | ASTM A312/A312M-01 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes | 2001-09-10 | 구판 |
| 46 | ASTM A312/A312M-01a | Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes | 2001-09-10 | 구판 |
| 47 | ASTM A312/A312M-00c | Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes | 2001-09-10 | 구판 |
| 48 | ASTM A312/A312M-95ae1 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes | 구판 |
관련상품이 존재하지 않습니다.
ASTM A240/A240M-20a REDLINE - Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
