관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Industrial trucks — Safety requirements and verification — Part 2: Self-propelled variable-reach trucks
| 분야 | ISO/TC 110/SC 2 : Safety of powered industrial trucks |
|---|---|
| 적용범위 | This document gives safety requirements and the means for their verification for self-propelled industrial variable-reach trucks and variable-reach container handlers/reach stackers as defined in ISO 5053‑1 (hereafter referred to as trucks), equipped with forks or integral load-handling devices for normal industrial duties (e.g. fork arms or means, such as spreaders, for handling containers). This document does not apply to: — rough-terrain variable-reach trucks, — rough-terrain variable-reach trucks for handling containers, — lorry mounted trucks covered by ISO 20297-1, — machines designed primarily for earth-moving (e.g. loaders and dozers), even when their buckets and blades are replaced with forks, — machines from which the load can swing freely in all directions. This document is not applicable to trucks manufactured before the date of its publication. For the purposes of this document, fork arms and integrated attachments are considered to be a part of the truck, whereas attachments/equipment/tools mounted on the load carrier or on the fork arms which are removable by the user are not. Nevertheless, for interchangeable equipment, which is assembled with the truck by the operator in order to change the function of, or attribute a new function to, the truck, this document does provide requirements for: — the interface with the truck, — protection of the operator in the normal operating position from crushing and shearing hazards, — operating and maintenance instructions, — load charts, — marking, — provision for transportation, and, — indicator lights for attachments for lifting containers Any regional requirements additional to the provisions of this document are addressed in EN 16307-2:2023 and ISO/TS 3691‑8. This document deals with all significant hazards, hazardous situations or hazardous events, as listed in Annex B, with the exception of the following, relevant to the applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. It does not establish requirements for hazards that can occur: — during construction; — when using trucks on public roads; — when operating in potentially explosive atmospheres; — when lifting persons; or — during dismantling, disabling and scrapping. This document does not provide requirements for: — tools, lifting accessories or removeable attachments, which do not change the function or attribute a new function, mounted on the load carrier or fork arms; — attachments/equipment mounted on the load carrier or on the fork arms which are removable by the user and which change the function or attribute a new function, except as stated above; — the reliability of control systems and performance requirements for safety related parts of control systems; or — the requirement for fitting an enclosed cab, whether pressurized or not. |
| 국제분류(ICS)코드 | 53.060 : 산업용 트럭 |
| 페이지수 | 46 |
| Edition | 2 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 3691-2:2023 | Industrial trucks — Safety requirements and verification — Part 2: Self-propelled variable-reach trucks | 2023-03-01 | 표준 |
| 2 | ISO 3691-2:2016 | Industrial trucks — Safety requirements and verification — Part 2: Self-propelled variable-reach trucks | 2016-01-04 | 구판 |
ISO 3691-1:2011/DAmd 2 - Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks — Amendment 2 상세보기
ISO/DIS 3691-1 - Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks 상세보기
ISO 3691-1:2011 - Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks 상세보기
ISO/TS 3691-7:2011 - Industrial trucks — Safety requirements and verification — Part 7: Regional requirements for countries within the European Community 상세보기
ISO 3691-1:2011/Cor 1:2013 - 상세보기
BS EN 61800-4:2003 - Adjustable speed electrical power drive systems. General requirements. Rating specifications for a.c. power drive systems above 1000 V a.c. and not exceeding 35 kV. 상세보기
UL 1740 : 4th Edition(2023) - UL Standard for Safety Robots and Robotic Equipment 상세보기
UL 3100 : 1st Edition(2023) - UL Standard for Safety Automated Mobile Platforms (AMPs) 상세보기
UL 3300 OUTLINE : 3rd Edition(2021) - UL Outline of Investigation for Service, Communication, Information, Education and Entertainment Robots 상세보기
UL 2271 : 3rd Edition(2023) - UL Standard for Safety Batteries for Use In Light Electric Vehicle (LEV) Applications 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
