관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Industrial trucks — Safety requirements and verification — Part 2: Self-propelled variable-reach trucks
| 분야 | ISO/TC 110/SC 2 : Safety of powered industrial trucks |
|---|---|
| 적용범위 | ISO 3691-2:2016 gives safety requirements and the means for their verification for self-propelled industrial variable-reach trucks and variable-reach container handlers/reach stackers as defined in ISO 5053‑1 (hereafter referred to as trucks), equipped with forks or integral load-handling devices for normal industrial duties (e.g. fork arms or means, such as spreaders, for handling containers). It is not applicable to - rough-terrain variable-reach trucks, - rough-terrain variable-reach trucks for handling containers, - machines designed primarily for earth-moving (e.g. loaders and dozers), even when their buckets and blades are replaced with forks, - machines from which the load can swing freely in all directions. For the purposes of this part of ISO 3691, fork arms and integrated attachments are considered to be a part of the truck, whereas attachments/equipment mounted on the load carrier or on the fork arms which are removable by the user are not. Nevertheless, requirements for such attachments are also given by the document. Any regional requirements additional to the provisions of this part of ISO 3691 are addressed in ISO/TS 3691‑7 and ISO/TS 3691‑8. ISO 3691-2:2016 deals with all significant hazards, hazardous situations or hazardous events, as listed in Annex B, with the exception of the following, relevant to the applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. It does not establish requirements for hazards that can occur - during construction, - when using trucks on public roads, - when operating in potentially explosive atmospheres, or - when lifting persons. |
| 국제분류(ICS)코드 | 53.060 : 산업용 트럭 |
| 페이지수 | 41 |
| Edition | 1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 3691-2:2023 | Industrial trucks — Safety requirements and verification — Part 2: Self-propelled variable-reach trucks | 2023-03-01 | 표준 |
| 2 | ISO 3691-2:2016 | Industrial trucks — Safety requirements and verification — Part 2: Self-propelled variable-reach trucks | 2016-01-04 | 구판 |
ISO 3691-1:2011/DAmd 2 - Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks — Amendment 2 상세보기
ISO/DIS 3691-1 - Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks 상세보기
ISO 3691-1:2011 - Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks 상세보기
ISO/TS 3691-7:2011 - Industrial trucks — Safety requirements and verification — Part 7: Regional requirements for countries within the European Community 상세보기
ISO 3691-1:2011/Cor 1:2013 - 상세보기
ISO 3691-3:2016 - Industrial trucks — Safety requirements and verification — Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads 상세보기
ISO 3691-4:2020 - Industrial trucks — Safety requirements and verification — Part 4: Driverless industrial trucks and their systems 상세보기
ISO 3691-1:2011 - Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks 상세보기
ISO 3691-6:2013 - Industrial trucks — Safety requirements and verification — Part 6: Burden and personnel carriers 상세보기
CSA C22.2 NO. 62282-2:18 (R2022) - Fuel cell technologies — Part 2: Fuel cell modules (Adopted IEC 62282-2:2012, second edition, 2012-03, with Canadian deviations) | Technologies des piles à combustible — Partie 2 : Modules à piles à combustible (norme IEC 62282-2:2012 adoptée, deuxième éd 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
