관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Gaseous hydrogen — Fuelling stations — Part 1: General requirements
| 분야 | ISO/TC 197 : Hydrogen technologies |
|---|---|
| 적용범위 | This document defines the minimum design, installation, commissioning, operation, inspection and maintenance requirements, for the safety, and, where appropriate, for the performance of public and non-public fuelling stations that dispense gaseous hydrogen to light duty road vehicles (e.g. fuel cell electric vehicles). This document is not applicable to the dispensing of cryogenic hydrogen, or hydrogen to metal hydride applications. Since this document is intended to provide minimum requirements for fuelling stations, manufacturers can take additional safety precautions as determined by a risk management methodology to address potential safety risks of specific designs and applications. While this document is targeted for the fuelling of light duty hydrogen road vehicles, requirements and guidance for fuelling medium and heavy duty road vehicles (e.g. buses, trucks) are also covered. Many of the generic requirements within this document are applicable to fuelling stations for other hydrogen applications, including but not limited to the following: — fuelling stations for motorcycles, fork-lift trucks, trams, trains, fluvial and marine applications; — fuelling stations with indoor dispensing; — residential applications to fuel land vehicles; — mobile fuelling stations; and — non-public demonstration fuelling stations. However, further specific requirements that can be necessary for the safe operation of such fuelling stations are not addressed in this document. This document provides requirements for and guidance on the following elements of a fuelling station (see Figure 1 and Figure 2): — hydrogen production/delivery system:
— compression:
— gaseous hydrogen buffer storage; — pre-cooling device; — gaseous hydrogen dispensing systems. |
| 국제분류(ICS)코드 |
71.100.20 : 공업용 가스
43.060.40 : 연료 시스템 |
| 페이지수 | 173 |
| Edition | 1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 19880-1:2020 | Gaseous hydrogen — Fuelling stations — Part 1: General requirements | 2020-03-04 | 표준 |
| 2 | ISO/TS 19880-1:2016 | Gaseous hydrogen — Fuelling stations — Part 1: General requirements | 2016-06-30 | 구판 |
ISO/DIS 19880-7 - Gaseous hydrogen — Fuelling stations — Part 7: Rubber O-rings 상세보기
ISO 19880-8 - Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control 상세보기
ISO/FDIS 19880-2 - Gaseous hydrogen — Fuelling stations — Part 2: Dispensers and dispensing systems 상세보기
ISO/DIS 19880-5 - Gaseous hydrogen — Fuelling stations — Part 5: Dispenser hoses and hose assemblies 상세보기
ISO 19880-3:2018 - Gaseous hydrogen — Fuelling stations — Part 3: Valves 상세보기
ISO/TR 15916:2015 - Basic considerations for the safety of hydrogen systems 상세보기
ISO 19880-8:2019 - Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control 상세보기
SAE J2719_202003 - Hydrogen Fuel Quality for Fuel Cell Vehicles 상세보기
IEEE 1491-2012 - IEEE Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications 상세보기
IEEE 1584-2018 - IEEE Guide for Performing Arc-Flash Hazard Calculations 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
