관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Gaseous hydrogen — Fuelling stations — Part 1: General requirements
| 분야 | ISO/TC 197 : Hydrogen technologies |
|---|---|
| 적용범위 | ISO/TS 19880-1:2016 recommends the minimum design characteristics for safety and, where appropriate, for performance of public and non-public fuelling stations that dispense gaseous hydrogen to light duty land vehicles (e.g. Fuel Cell Electric Vehicles). NOTE These recommendations are in addition to applicable national regulations and codes, which can prohibit certain aspects of this document. It is applicable to fuelling for light duty hydrogen land vehicles, but it can also be used as guidance for fuelling buses, trams, motorcycles and fork-lift truck applications, with hydrogen storage capacities outside of current published fuelling protocol standards, such as SAE J2601. Residential applications to fuel land vehicles and non-public demonstration fuelling stations are not included in ISO/TS 19880-1:2016. It provides guidance on the following elements of a fuelling station: - hydrogen production/delivery system - delivery of hydrogen by pipeline, trucked in gaseous and/or liquid hydrogen, or metal hydride storage trailers; - on-site hydrogen generators using water electrolysis process or hydrogen generators using fuel processing technologies; - liquid hydrogen storage; - hydrogen purification systems, as applicable; - compression - gaseous hydrogen compression; - pumps and vaporizers; - gaseous hydrogen buffer storage; - pre-cooling device; - gaseous hydrogen dispensers. |
| 국제분류(ICS)코드 |
71.100.20 : 공업용 가스
43.060.40 : 연료 시스템 |
| 페이지수 | 121 |
| Edition | 1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 19880-1:2020 | Gaseous hydrogen — Fuelling stations — Part 1: General requirements | 2020-03-04 | 표준 |
| 2 | ISO/TS 19880-1:2016 | Gaseous hydrogen — Fuelling stations — Part 1: General requirements | 2016-06-30 | 구판 |
ISO/DIS 19880-7 - Gaseous hydrogen — Fuelling stations — Part 7: Rubber O-rings 상세보기
ISO 19880-8 - Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control 상세보기
ISO/FDIS 19880-2 - Gaseous hydrogen — Fuelling stations — Part 2: Dispensers and dispensing systems 상세보기
ISO/DIS 19880-5 - Gaseous hydrogen — Fuelling stations — Part 5: Dispenser hoses and hose assemblies 상세보기
ISO 19880-3:2018 - Gaseous hydrogen — Fuelling stations — Part 3: Valves 상세보기
ISO 26142:2010 - Hydrogen detection apparatus — Stationary applications 상세보기
ISO/TR 15916:2015 - Basic considerations for the safety of hydrogen systems 상세보기
ISO 16110-2:2010 - Hydrogen generators using fuel processing technologies — Part 2: Test methods for performance 상세보기
ISO 16110-1:2007 - Hydrogen generators using fuel processing technologies — Part 1: Safety 상세보기
ISO 1123:1976 - Tapered roller bearings -- Inch series -- Chamfer dimension limits 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
