관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
| 분야 | ISO/TC 199 : Safety of machinery |
|---|---|
| 적용범위 | ISO 14122-1:2016 gives general requirements for access to stationary machines and guidance about the correct choice of means of access when necessary access to the stationary machine is not possible directly from the ground level or from a floor. It is applicable to permanent means of access which are a part of a stationary machine, and also to non-powered adjustable parts (e.g. foldable, slidable) and movable parts of fixed means of access. NOTE 1 "Fixed" means of access are those mounted in such a manner (for example, by screws, nuts, welding) that they can only be removed by the use of tools. ISO 14122-1:2016 specifies minimum requirements that also apply when the same means of access is required as the part of the building or civil construction (e.g. working platforms, walkways, ladders) where the machine is installed, on condition that the main function of that part of the construction is to provide a means of access to the machine. NOTE 2 Where no local regulation or standards exist, this part of ISO 14122 can be used for means of access which are outside the scope of the standard. It is intended that this part of ISO 14122 be used with a relevant access-specific part of ISO 14122. The ISO 14122 series as a whole is applicable to both stationary and mobile machinery where fixed means of access are necessary. It is not applicable to powered means of access such as lifts, escalators, or other devices specially designed to lift persons between two levels. ISO 14122-1:2016 is not applicable to machinery manufactured before the date of its publication. For the significant hazards covered by this part of ISO 14122, see Clause 4. |
| 국제분류(ICS)코드 | 13.110 : 기계 안전성 |
| 페이지수 | 10 |
| Edition | 2 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access | 2016-05-27 | 표준 |
| 2 | ISO 14122-1:2001/Amd 1:2010 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means of access between two levels — Amendment 1 | 2010-04-12 | 구판 |
| 3 | ISO 14122-1:2001 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means of access between two levels | 2001-06-07 | 구판 |
ISO 14122-2:2016 - Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways 상세보기
ISO 14122-3:2016 - Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails 상세보기
ISO 14122-4:2016 - Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders 상세보기
ISO 14122-2:2016 - Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways 상세보기
ISO 14122-3:2016 - Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails 상세보기
ISO 14119:2013 - Safety of machinery — Interlocking devices associated with guards — Principles for design and selection 상세보기
ISO 14120:2015 - Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards 상세보기
ISO 14122-4:2016 - Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
