관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
| 분야 | ISO/TC 199 : Safety of machinery |
|---|---|
| 적용범위 | ISO 14122-3:2016 gives requirements for non-powered stairs, stepladders and guard-rails which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, slidable) and movable parts of those fixed means of access. NOTE 1 "Fixed" means of access are those mounted in such a manner (for example, by screws, nuts, welding) that they can only be removed by the use of tools. ISO 14122-3:2016 specifies minimum requirements that also apply when the same means of access is required as the part of the building or civil construction (e.g. stairs, stepladders, guard-rails) where the machine is installed, on condition that the main function of that part of the construction is to provide a means of access to the machine. NOTE 2 Where no local regulation or standards exists, this part of ISO 14122 may be used also for means of access which are outside the scope of the standard. It is intended that this part of ISO 14122 be used with ISO 14122‑1 to give the requirements for steps, stepladders and guard-rails. The ISO 14122 series as a whole is applicable to both stationary and mobile machinery where fixed means of access are necessary. It is not applicable to powered means of access such as lifts, escalators, or other devices specially designed to lift persons between two levels. ISO 14122-3:2016 is not applicable to machinery manufactured before the date of its publication. |
| 국제분류(ICS)코드 | 13.110 : 기계 안전성 |
| 페이지수 | 22 |
| Edition | 2 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails | 2016-05-27 | 표준 |
| 2 | ISO 14122-3:2001/Amd 1:2010 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails — Amendment 1 | 2010-04-12 | 구판 |
| 3 | ISO 14122-3:2001 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails | 2001-06-07 | 구판 |
ISO 14122-1:2016 - Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access 상세보기
ISO 14122-2:2016 - Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways 상세보기
ISO 14122-4:2016 - Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders 상세보기
ISO 14122-2:2016 - Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways 상세보기
ISO 14122-1:2016 - Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access 상세보기
ISO 14122-4:2016 - Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders 상세보기
ASME B30.10-2019 - Hooks (B30.10 - 2019) 상세보기
ASME B30.17-2020 - Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist) (B30.17 - 2020) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
