관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement
| 분야 | ISO/TC 156 : Corrosion of metals and alloys |
|---|---|
| 적용범위 | ISO 7539-6:2002 covers procedures for designing, preparing and using pre-cracked specimens for investigating susceptibility to stress corrosion. It gives recommendations for the design, preparation and use of pre-cracked specimens for investigating susceptibility to stress corrosion. The term "metal" as used in this part of ISO 7539 includes alloys. Because of the need to confine plasticity at the crack tip, pre-cracked specimens are not suitable for the evaluation of thin products such as sheet or wire and are generally used for thicker products including plate bar and forgings. They can also be used for parts joined by welding. |
| 국제분류(ICS)코드 | 77.060 : 금속 부식 |
| 페이지수 | 38 |
| Edition | 2 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 7539-6:2018/Amd 1:2024 | Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement — Amendment 1 | 2024-04-26 | 표준 |
| 2 | ISO 7539-6:2018 | Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement | 2018-08-22 | 표준 |
| 3 | ISO 7539-6:2011 | Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement | 2011-10-10 | 구판 |
| 4 | ISO 7539-6:2003 | Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement | 2003-02-06 | 구판 |
| 5 | ISO 7539-6:1989 | Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of pre-cracked specimens | 1989-12-21 | 구판 |
ISO 7539-2:1989 - Corrosion of metals and alloys — Stress corrosion testing — Part 2: Preparation and use of bent-beam specimens 상세보기
ISO 7539-4:1989 - Corrosion of metals and alloys — Stress corrosion testing — Part 4: Preparation and use of uniaxially loaded tension specimens 상세보기
ISO 7539-5:1989 - Corrosion of metals and alloys — Stress corrosion testing — Part 5: Preparation and use of C-ring specimens 상세보기
ISO 7539-3:1989 - Corrosion of metals and alloys — Stress corrosion testing — Part 3: Preparation and use of U-bend specimens 상세보기
ISO 7539-8:2000 - Corrosion of metals and alloys — Stress corrosion testing — Part 8: Preparation and use of specimens to evaluate weldments 상세보기
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
