관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
| 분야 | ISO/TC 156 : Corrosion of metals and alloys |
|---|---|
| 적용범위 | ISO 7539-6:2011 covers procedures for designing, preparing and using precracked specimens for investigating susceptibility to stress corrosion. It gives recommendations for the design, preparation and use of precracked specimens for investigating susceptibility to stress corrosion. The term "metal" as used in ISO 7539-6:2011 includes alloys. Because of the need to confine plasticity at the crack tip, precracked specimens are not suitable for the evaluation of thin products, such as sheet or wire, and are generally used for thicker products including plate bar and forgings. They can also be used for parts joined by welding. Precracked specimens can be loaded with equipment for application of a constant load or can incorporate a device to produce a constant displacement at the loading points. Tests conducted under increasing displacement or increasing load are dealt with in ISO 7539-9. A particular advantage of precracked specimens is that they allow data to be acquired from which critical defect sizes, above which stress corrosion cracking can occur, can be estimated for components of known geometry subjected to known stresses. They also enable rates of stress corrosion crack propagation to be determined. The latter data can be taken into account when monitoring parts containing defects during service. |
| 국제분류(ICS)코드 | 77.060 : 금속 부식 |
| 페이지수 | 38 |
| Edition | 3 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 7539-6:2018/Amd 1:2024 | Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement — Amendment 1 | 2024-04-26 | 표준 |
| 2 | ISO 7539-6:2018 | Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement | 2018-08-22 | 표준 |
| 3 | ISO 7539-6:2011 | Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement | 2011-10-10 | 구판 |
| 4 | ISO 7539-6:2003 | Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement | 2003-02-06 | 구판 |
| 5 | ISO 7539-6:1989 | Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of pre-cracked specimens | 1989-12-21 | 구판 |
ISO 7539-2:1989 - Corrosion of metals and alloys — Stress corrosion testing — Part 2: Preparation and use of bent-beam specimens 상세보기
ISO 7539-4:1989 - Corrosion of metals and alloys — Stress corrosion testing — Part 4: Preparation and use of uniaxially loaded tension specimens 상세보기
ISO 7539-5:1989 - Corrosion of metals and alloys — Stress corrosion testing — Part 5: Preparation and use of C-ring specimens 상세보기
ISO 7539-3:1989 - Corrosion of metals and alloys — Stress corrosion testing — Part 3: Preparation and use of U-bend specimens 상세보기
ISO 7539-8:2000 - Corrosion of metals and alloys — Stress corrosion testing — Part 8: Preparation and use of specimens to evaluate weldments 상세보기
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
