관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy
| 분야 | TC 22/SC 22G : Adjustable speed electric power drive systems (PDS) |
|---|---|
| 적용범위 | IEC 61800-5-1:2007+A1:2016 It specifies requirements for adjustable speed power drive systems, or their elements, with respect to electrical, thermal and energy safety considerations. It does not cover the driven equipment except for interface requirements. It applies to adjustable speed electric drive systems which include the power conversion, drive control, and motor or motors. Excluded are traction and electric vehicle drives. It applies to d.c. drive systems connected to line voltages up to 1 kV a.c., 50 Hz or 60 Hz and a.c. drive systems with converter input voltages up to 35 kV, 50 Hz or 60 Hz and output voltages up to 35 kV. The major areas of change in this edition are the following: - addition of alphabetical Table 1 in Clause 3; - addition of Table 2 in 4.1 for relevance to PDS/CDM/BDM; - addition of Table 4 summary of decisive voltage class requirements; - expansion of subclause on protective bonding (4.3.5.3); - clarification of distinction between touch current and protective conductor current; - revision of section on insulation (now 4.3.6) to include solid insulation; - addition of overvoltage categories I and II to HV insulation voltage; - revision of section on Solid insulation (now 4.3.6.8); - addition of high-frequency insulation requirements (4.3.6.9, Annex E); - addition of requirements for liquid-cooled PDS (4.4.5); - addition of climatic and vibration tests (5.2.6); - clarification of voltage test procedure to avoid over-stress of basic insulation (5.2.3.2.3); - revision of short-circuit test requirement for large, high-voltage and one-off PDS (now 5.2.3.6); - addition of informative Annex B for overvoltage category reduction. This consolidated version consists of the second edition (2007) and its amendment 1 (2016). Therefore, no need to order amendment in addition to this publication. |
| 국제분류(ICS)코드 | 29.130 : 스위치 기어 및 콘트롤 기어 |
| 페이지수 | 503 |
| Edition | 2.1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 61800-5-1:2022/COR1:2023 | Corrigendum 1 - Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy | 2023-09-04 | 표준 |
| 2 | IEC 61800-5-1:2022 | Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy | 2022-08-31 | 표준 |
| 3 | IEC 61800-5-1:2007+AMD1:2016 CSV | Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy | 2016-08-31 | 구판 |
| 4 | IEC 61800-5-1:2007/AMD1:2016 | Amendment 1 - Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy | 2016-08-31 | 구판 |
| 5 | IEC 61800-5-1:2007 | Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy | 2007-07-16 | 구판 |
| 6 | IEC 61800-5-1:2003/COR1:2003 | Corrigendum 1 - Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy | 2003-09-17 | 구판 |
| 7 | IEC 61800-5-1:2003 | Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy | 2003-02-13 | 구판 |
IEC 61800-4:2002 - Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV 상세보기
IEC TR 61800-6:2003 - Adjustable speed electrical power drive systems - Part 6: Guide for determination of types of load duty and corresponding current ratings 상세보기
IEC TS 61800-8:2010 - Adjustable speed electrical power drive systems - Part 8: Specification of voltage on the power interface 상세보기
IEC 61800-7-301:2015 - Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies 상세보기
IEC 61800-7-201:2015 - Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification 상세보기
IEC 60146-1-1:2009 - Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements 상세보기
IEC 62040-3:2021 - Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements 상세보기
ASTM B117-19 - Standard Practice for Operating Salt Spray (Fog) Apparatus 상세보기
IEC 62620:2014 - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications 상세보기
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV - Degrees of protection provided by enclosures (IP Code) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
