관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
| 분야 | TC 22/SC 22H : Uninterruptible power systems (UPS) |
|---|---|
| 적용범위 | IEC 62040-3:2021 establishes the performance and test requirements applied to movable, stationary and fixed electronic uninterruptible power systems (UPS) that - are supplied from AC voltage not exceeding 1 000 V, - deliver AC output voltage not exceeding 1 000 V, - incorporate an energy storage device not exceeding 1 500 V DC, and - have a primary function to ensure continuity of load power. This document specifies performance and test requirements of a complete UPS and, where applicable, of individual UPS functional units. This document also includes UPS performance and test requirements related to UPS switches that interact with UPS functional units to maintain continuity of load power. This document does not cover - conventional AC and DC distribution boards and their associated switches, - stand-alone static transfer systems covered by IEC 62310-3, - rotary UPS covered by IEC 88528-11, and - DC UPS covered by IEC 62040-5-3. This edition includes the following significant technical changes with respect to the previous edition: 1) environmental conditions aligned with IEC 62040-1:2017 (UPS safety requirements); 2) compliance requirements included in all sub-clauses referenced in Table 5 UPS test schedule; 3) non-linear step load is no longer a type test and was removed from 6.4 in consistency with requirements for switch mode power supplies incorporating inrush current controls; this resulted in the performance classification coding being shortened from 8 to 7 characters (see 5.3.4); 4) free-fall test aligned with ISO 4180 (see 6.5.1.3); 5) multiple normal mode UPS test requirements introduced; 6) non-linear load requirements relaxed in Annex E in consistency with requirements for switch mode power supplies complying with the applicable limits for harmonic current in IEC 61000-3-2 and IEC 61000-3-12; 7) minimum UPS efficiency values referenced in Annex I became normative and are based on active output power rating and utilisation of weighting factors rather than on allowances related to isolation transformers, input harmonic current filters and input voltages. |
| 국제분류(ICS)코드 | 29.200 : 정류기. 변환기. 안정된 동력공급원 |
| 페이지수 | 193 |
| Edition | 3.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 62040-3:2021 | Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements | 2021-04-21 | 표준 |
| 2 | IEC 62040-3:2011/COR1:2011 | Corrigendum 1 - Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements | 2011-09-13 | 구판 |
| 3 | IEC 62040-3:2011 | Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements | 2011-03-14 | 구판 |
| 4 | IEC 62040-3:1999/COR1:2003 | Corrigendum 1 - Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements | 2003-07-31 | 구판 |
| 5 | IEC 62040-3:1999 | Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements | 1999-03-31 | 구판 |
IEC 62040-1-2:2002 - Uninterruptible power systems (UPS) - Part 1-2: General and safety requirements for UPS used in restricted access locations 상세보기
IEC 62040-1-1:2002 - Uninterruptible power systems (UPS) - Part 1-1: General and safety requirements for UPS used in operator access areas 상세보기
IEC 62040-1-1:2002/COR1:2002 - Corrigendum 1 - Uninterruptible power systems (UPS) - Part 1-1: General and safety requirements for UPS used in operator access areas 상세보기
IEC 62040-1-2:2002/COR1:2002 - Corrigendum 1 - Uninterruptible power systems (UPS) - Part 1-2: General and safety requirements for UPS used in restricted access locations 상세보기
IEC 62040-1-1:2002/COR2:2004 - Corrigendum 2 - Uninterruptible power systems (UPS) - Part 1-1: General and safety requirements for UPS used in operator access areas 상세보기
IEC 62271-100:2021 - High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers 상세보기
IEC 62271-200:2021 - High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV 상세보기
IEC 62271-1:2017+AMD1:2021 CSV - High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear 상세보기
IEC 62040-5-3:2016 - Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements 상세보기
IEC 62271-101:2021 - High-voltage switchgear and controlgear - Part 101: Synthetic testing 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
