관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
| 분야 | TC 104 : Environmental conditions, classification and methods of test |
|---|---|
| 적용범위 | IEC 60068-2-31:2008 deals with a test procedure for simulating the effects of rough handling shocks, primarily in equipment-type specimens, the effects of knocks, jolts and falls which may be received during repair work or rough handling in operational use. This procedure does not simulate the effects of impacts received during transportation as loosely constrained cargo. Where the effects of loose cargo transportation are to be assessed, test Ee: Bounce should be used. Also this procedure does not simulate the effects of shock applied to installed equipments. Where this effect is to be assessed refer to test Ea: Shock. Testing should only be specified for equipment likely to receive such rough handling, for example those of small to medium size and mass, and should only be applied to those faces and corners where there is a risk of such treatment being encountered. In general, equipment which is frequently handled and serviced (for example field equipment and unit spares) can be considered at risk, whereas equipment forming an integral part of a permanent installation would not normally be considered at risk and need not be tested. Testing may not be applicable to fragile unprotected equipment of irregular shape (for example aircraft nose radar) which, when removed from the installation would be contained in a handling frame or jig. It may however be applicable to these items of equipment when they are in their transit case or in their handling frame or jig. For equipment which stands only on one face (for example the normal base) the test is generally only applied to that face. Shock tests are performed on the specimen when fixed to the test machine. Drop and topple, free fall, repeated free fall and bounce tests are performed with the specimen free. This second edition cancels and replaces the first edition, published in 1969 and constitutes a technical revision. The major changes with regard to the previous edition concern the introduction of soft packaging tests, where appropriate. This new edition of IEC 60068-2-31 now incorporates the second edition of IEC 60068-2-32 (1975). |
| 국제분류(ICS)코드 | 19.040 : 환경 시험 |
| 페이지수 | 32 |
| Edition | 2.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens | 2008-05-21 | 표준 |
| 2 | IEC 60068-2-31:1969/AMD1:1982 | Amendment 1 - Environmental testing. Part 2: Tests. Test Ec: Drop and topple, primarily for equipment-type specimens | 1982-01-01 | 구판 |
| 3 | IEC 60068-2-31:1969 | Environmental testing. Part 2: Tests. Test Ec: Drop and topple, primarily for equipment-type specimens | 1969-01-01 | 구판 |
IEC 60068-2-3:1969 - Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state 상세보기
IEC 60068-2-33:1971 - Environmental testing - Part 2: Tests. Guidance on change of temperature tests 상세보기
IEC 60068-2-34:1973 - Basic environmental testing procedures - Part 2: Tests. Test Fd: Random vibration wide band - General requirements 상세보기
IEC 60068-2-35:1973 - Basic environmental testing procedures - Part 2: Tests - Test Fda: Random vibration wide band - Reproducibility High 상세보기
IEC 60068-2-36:1973 - Basic environmental testing procedures - Part 2: Tests - Test Fdb: Random vibration wide band - Reproducibility Medium 상세보기
IEC 60068-2-2:2007 - Environmental testing - Part 2-2: Tests - Test B: Dry heat 상세보기
IEC 60068-2-14:2009 - Environmental testing - Part 2-14: Tests - Test N: Change of temperature 상세보기
IEC 60068-2-30:2005 - Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) 상세보기
IEC 60068-2-1:2007 - Environmental testing - Part 2-1: Tests - Test A: Cold 상세보기
IEC 60068-2-6:2007 - Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
