관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
| 분야 | TC 104 : Environmental conditions, classification and methods of test |
|---|---|
| 적용범위 | IEC 60068-2-30:2005 Determines the suitability of components, equipment or other articles for use, transportation and storage under conditions of high humidity - combined with cyclic temperature changes and, in general, producing condensation on the surface of the specimen. If the test is being used to verify the performance of a specimen whilst it is being transported or stored in packaging then the packaging will normally be fitted when the test conditions are being applied. For small, low mass specimens, it may be difficult to produce condensation on the surface of the specimen using this procedure; users should consider the use of an alternative procedure such as that given to IEC 60068-2-38. The main changes with respect to the previous edition are listed below: - editorial changes, - addition of normative references, - addition of guidance for temperature tolerances, - period for recovery has been extended. |
| 국제분류(ICS)코드 | 19.040 : 환경 시험 |
| 페이지수 | 27 |
| Edition | 3.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) | 2005-08-10 | 표준 |
| 2 | IEC 60068-2-30:1980/AMD1:1985 | Amendment 1 - Environmental testing - Part 2: Tests. Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle) | 1985-08-01 | 구판 |
| 3 | IEC 60068-2-30:1980 | Environmental testing - Part 2: Tests. Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle) | 1980-01-01 | 구판 |
| 4 | IEC 60068-2-30:1969 | Basic environmental testing procedures - Part 2: Tests - Test Db: Damp heat, cyclic (12+12-hour cycle) | 1969-01-01 | 구판 |
IEC 60068-2-3:1969 - Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state 상세보기
IEC 60068-2-33:1971 - Environmental testing - Part 2: Tests. Guidance on change of temperature tests 상세보기
IEC 60068-2-34:1973 - Basic environmental testing procedures - Part 2: Tests. Test Fd: Random vibration wide band - General requirements 상세보기
IEC 60068-2-35:1973 - Basic environmental testing procedures - Part 2: Tests - Test Fda: Random vibration wide band - Reproducibility High 상세보기
IEC 60068-2-36:1973 - Basic environmental testing procedures - Part 2: Tests - Test Fdb: Random vibration wide band - Reproducibility Medium 상세보기
IEC 60068-2-1:2007 - Environmental testing - Part 2-1: Tests - Test A: Cold 상세보기
IEC 60068-2-2:2007 - Environmental testing - Part 2-2: Tests - Test B: Dry heat 상세보기
IEC 60068-2-14:2009 - Environmental testing - Part 2-14: Tests - Test N: Change of temperature 상세보기
IEC 60068-2-78:2012 - Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state 상세보기
IEC 60068-2-6:2007 - Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
