관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Hydrogen Piping and Pipelines (B31.12 - 2014)
| 분야 | B31 : Piping |
|---|---|
| 적용범위 | ASME B31.12 Standard on Hydrogen Piping and Pipelines contains requirements for piping in gaseous and liquid hydrogen service and pipelines in gaseous hydrogen service. The general requirements section covers materials, brazing, welding, heat treating, forming, testing, inspection, examination, operating, and maintenance. The industrial piping section covers requirements for components, design, fabrication, assembly, erection, inspection, examination, and testing of piping. This Code is applicable to piping in gaseous and liquid hydrogen service and to pipelines in gaseous hydrogen service. B31.12 is applicable up to and including the joint connecting the piping to associated pressure vessels and equipment but not to the vessels and equipment themselves. It is also applicable to the location and type of support elements, but not to the structure to which the support elements are attached. B31.12 is presented in the following parts: (a) Part GR ? General Requirements. This part contains definitions and requirements for materials, welding, brazing, heat treating, forming, testing, inspection, examination, operation, and maintenance. (b) Part IP ? Industrial Piping. This part includes requirements for components, design, fabrication, assembly, erection, inspection, examination, and testing of piping. (c) Part PL ? Pipelines. This part sets forth requirements for components, design, installation, and testing of hydrogen pipelines. It is required that each part be used in conjunction with the General Requirements section but independent of the other parts. It is not intended that this edition of this Code be applied retroactively to existing hydrogen systems. Key changes to this revision include: New Section GR-6.3 for Quality System Functions; New table for Required Nondestructive Examinations added to Chapter IP-10; New paragraphs for Quality Control Examinations, Extent of Required NDE Examainations, Acceptance Criteria, Procedures, and Types of Examination added to Chapter IP-10; Updated references throughout; Equations for thickness of permanent blanks and of straight pipe have been updated. B31.12 serves as a companion to the other codes in ASME?s B31 series on Pressure Piping. Together, they remain essential references for anyone engaged with piping. |
| 국제분류(ICS)코드 | |
| 페이지수 | 280 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASME B31.12-2023 | Hydrogen Piping and Pipelines | 2023-12-29 | 표준 |
| 2 | ASME B31.12-2019 | Hydrogen Piping and Pipelines (B31.12 - 2014) | 2019-01-01 | 구판 |
| 3 | ASME B31.12-2014 | Hydrogen Piping and Pipelines (B31.12 - 2014) | 2014-01-01 | 구판 |
| 4 | ASME B31.12-2011 | B31.12 - 2011 Hydrogen Piping and Pipelines (B31.12 - 2011) | 2011-01-01 | 구판 |
| 5 | ASME B31.12-2008 | Hydrogen Piping and Pipelines (B31.12 - 2008) | 2008-01-01 | 구판 |
관련상품이 존재하지 않습니다.
ASME B31.8-2020 - Gas Transmission and Distribution Piping Systems 상세보기
ASME STP-PT-006-2007 - Design Guidelines for Hydrogen Piping and Pipelines (STP-PT-006 - 2007) 상세보기
ASME B31.3-2020 - Process Piping 상세보기
ISO 11114-4:2017 - Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 4: Test methods for selecting steels resistant to hydrogen embrittlement 상세보기
ASME PTC 50-2002(R2019) - Fuel Cell Power Systems Performance (PTC 50 - 2002) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
