관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Performance Test Code on Compressors and Exhausters (PTC 10 - 1997)
| 분야 | PTC : Performance Test Code |
|---|---|
| 적용범위 | This Code provides test procedures to determine the thermodynamic performance of an axial or centrifugal compressor or exhauster doing work on a gas of known or measurable properties under specified conditions. This Code is written to provide explicit test procedures which will yield the highest level of accuracy consistent with the best engineering knowledge and practice currently available. Nonetheless, no single universal value of the uncertainty is, or should be, expected to apply to every test. The uncertainty associated with any individual PTC 10 test will depend upon practical choices made in terms of instrumentation and methodology. Rules are provided to estimate the uncertainty for individual tests. The scope of this Code includes instructions on test arrangement and instrumentation, test procedure, and methods for evaluation and reporting of final results. Rules are provided for establishing the following quantities, corrected as necessary to represent expected performance under specified operating conditions with the specified gas: (a) quantity of gas delivered, (b) pressure rise produced, (c) head, (d) shaft power required, (e) efficiency, (f) surge point, (g) choke point. Other than providing methods for calculating mechanical power losses, this Code does not cover rotor dynamics or other mechanical performance parameters. This Code is designed to allow the testing of single or multiple casing axial or centrifugal compressors or combinations thereof, with one or more stages of compression per casing. Procedures are also included for externally piped intercoolers and for compressors with interstage side load inlets or outlets. Internally cooled compressors are included provided that test conditions are held nearly identical to specified conditions. |
| 국제분류(ICS)코드 | |
| 페이지수 | 200 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASME PTC 10-2022 | Axial and Centrifugal Compressors | 2023-08-24 | 표준 |
| 2 | ASME PTC 10-1997(R2014) | Performance Test Code on Compressors and Exhausters (PTC 10 - 1997) | 1997-01-01 | 구판 |
| 3 | ASME PTC 10-1981 | Flue and Exhaust Gas Analyses (PTC 19.10 - 1981) | 1981-01-01 | 구판 |
관련상품이 존재하지 않습니다.
ASME PTC 11-2008(R2018) - Fans (PTC 11 - 2008) 상세보기
ASME PTC 8.2-1990 - Centrifugal Pumps (PTC 8.2 - 1990) 상세보기
ASME PTC 24-1976(R1982) - Ejectors (PTC 24 - 1976) 상세보기
ASME PTC 12.3-1997(R2019) - Performance Test Code on Deaerators (PTC 12.3 - 1997) 상세보기
BS EN 14735:2021 - Characterization of waste. Preparation of waste samples for ecotoxicity tests. 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
