ASTM A269/A269M-22 REDLINE Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.

PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)

PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

구판 판매

ASTM A269/A269M-22 REDLINE

Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

- 발행일 : 2022-11-01
- 발행기관 : ASTM

레드라인 이란?: 최신표준과 직전 구판표준의 변경내용을 포함하고 있는 버전. 구입 시 최신표준과 레드라인 두 개 파일을 제공합니다.(단, ISO는 제외)

언어	제공형태	판매가격	선택
(레드라인) 영어	PDF	128,900원
(레드라인) 영어	PRINT	128,900원

장바구니 담기

상품이 장바구니에 담겼습니다.

장바구니로 이동

상세정보

분야

적용범위

1.1?This specification covers grades of nominal-wall-thickness, stainless steel tubing for general corrosion-resisting and low- or high-temperature service, as designated in Table 1.

Grade	Composition, %
Grade	TP XM-29	. . .	. . .	. . .	. . .	. . .	. . .	. . .	. . .	. . .	. . .	. . .	. . .	. . .	. . .	. . .
UNS Designation^A	S24000	S31254	S31266	S31725	S31726	S31727	S32053	S30600^A	S32654	S34565	S35045	S35030	N08367	N08925	N08926	N08904
Carbon	0.08	0.020	0.030 max	0.035	0.035	0.030	0.030	0.018	0.020	0.030	0.06? 0.10	0.05?0.10	0.030	0.020	0.020	0.020
Manganese	11.5? 14.5	1.00	2.00?4.00	2.00	2.00	1.00	1.00	2.0	2.0? 4.0	5.0? 7.0	1.50	1.50	2.00	1.00	2.00	2.00
Phosphorus	0.060	0.030	0.035	0.045	0.045	0.030	0.030	0.020	0.030	0.030	0.045	0.030	0.040	0.045	0.030	0.040
Sulfur.	0.030	0.015	0.020	0.030	0.030	0.030	0.010	0.020	0.005	0.010	0.015	0.015	0.030	0.030	0.010	0.030
Silicon	1.00	0.80	1.00	1.00	1.00	1.00	1.00	3.7?4.3	0.50	1.00	1.00	0.50?2.0	1.00	0.50	0.50	1.00
Nickel	2.3? 3.7	17.5? 18.5	21.0?24.0	13.5? 17.5	14.5? 17.5	14.5? 16.5	24.0? 26.0	14.0? 15.5	21.0? 23.0	16.0? 18.0	32.0? 37.0	22.5? 27.5	23.5? 25.5	24.0?26.0	24.0? 26.0	23.0? 28.0
Chromium	17.0? 19.0	19.5? 20.5	23.0?25.0	18.0? 20.0	17.0? 20.0	17.5? 19.0	22.0? 24.0	17.0? 18.5	24.0? 25.0	23.0? 25.0	25.0? 29.0	18.5?22.5	20.0? 22.0	19.0?21.0	19.0? 21.0	19.0? 23.0
Molybdenum	...	6.0? 6.5	5.2?6.2	4.0? 5.0	4.0? 5.0	3.8? 4.5	5.0? 6.0	0.20 max	7.0? 8.0	4.0? 5.0	?	. . .	6.0? 7.0	6.0?7.0	6.0? 7.0	4.0? 5.0
Titanium	. . .	. . .	. . .	. . .	. . .	. . .	. . .	. . .	. . .	. . .	0.15? 0.60	. . .	. . .	. . .	. . .	. . .
Columbium	. . .	. . .	. . .	. . .	. . .	. . .	. . .	. . .	. . .	0.10 max	. . .	0.25?0.75	. . .	. . .	. . .	. . .
Tantalum	. . .	. . .	. . .	. . .	. . .	?	. . .	?	. . .	. . .	. . .	. . .	. . .	. . .	. . .	. . .
Nitrogen^F	0.20? 0.40	0.18? 0.25	0.35?0.60	0.20 max	0.10? 0.20	0.15? 0.21	0.17? 0.22	?	0.45? 0.55	0.40? 0.60	. . .	0.05?0.15	0.18? 0.25	0.10?0.20	0.15? 0.25	0.10 max
Vanadium	. . .	?	?	. . .	. . .	?	. . .	?	. . .	?	. . .	. . .	. . .	. . .	. . .	. . .
?Copper	. . .	0.50? 1.00	1.00?2.50	. . .	. . .	2.8? 4.0	. . .	0.50 max	0.30? 0.60	. . .	0.75	2.5?3.5	0.75 max	0.80?1.50	0.50? 1.50	1.00? 2.00
?Others	. . .	. . .	W 1.50?2.50	. . .	. . .	. . .	. . .	. . .	. . .	. . .	Al 0.15? 0.60	. . .	. . .	. . .	. . .	. . .

1.2?The tubing sizes and thicknesses usually furnished to this specification are ¹/₄?in. [6.4 mm] in inside diameter and larger and 0.020 in. [0.51 mm] in nominal wall-thickness and heavier.

1.3?Mechanical property requirements do not apply to tubing smaller than ¹/₈?in. [3.2 mm] in inside diameter or 0.015 in. [0.38 mm] in thickness.

Note 1:?Additional testing requirements may apply for use in ASME B31.3 applications.

1.4?Optional supplementary requirements are provided and, when one or more of these are desired, each shall be so stated in the order.

1.5?The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.

1.6?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

국제분류(ICS)코드

페이지수

Edition

이력정보

No.	표준번호	표준명	발행일	상태
1	ASTM A269/A269M-24	Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service	2024-03-01	표준
2	ASTM A269/A269M-24 REDLINE	Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service	2024-03-01	표준
3	ASTM A269/A269M-22	Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service	2022-11-01	구판
4	ASTM A269/A269M-22 REDLINE	Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service	2022-11-01	구판
5	ASTM A269/A269M-15a(2019)	Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service	2019-09-01	구판
6	ASTM A269/A269M-15a REDLINE	Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service	2015-12-01	구판
7	ASTM A269/A269M-15a	Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service	2015-12-01	구판
8	ASTM A269/A269M-15	Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service	2015-09-01	구판
9	ASTM A269/A269M-14e1	Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service	2014-05-01	구판
10	ASTM A269/A269M-14	Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service	2014-05-01	구판

관련상품

관련상품이 존재하지 않습니다.
다른 사람이 함께 구입한 상품

ASTM A480/A480M-23 - Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip 상세보기

ASTM A508/A508M-18(2023) - Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels 상세보기

ASTM A249/A249M-18a(2023) - Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes 상세보기

ASTM A312/A312M-22a - Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes 상세보기

ASTM A370-22 - Standard Test Methods and Definitions for Mechanical Testing of Steel Products 상세보기
추천 상품

IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기

IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기

KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기

KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기

KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기

해외표준

ASTM A269/A269M-22 REDLINE

상세정보

이력정보

관련상품

다른 사람이 함께 구입한 상품

추천 상품

전체서비스 보기