관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
| 분야 | |
|---|---|
| 적용범위 | 1.1 This test method is used to determine the resistance of plastics to breakage by flexural shock as indicated by the energy extracted from standardized (see Note 1) pendulum-type hammers, mounted in standardized machines, in breaking standard specimens with one pendulum swing. This test method requires specimens to be made with a milled notch (see Note 2). The notch produces a stress concentration which promotes a brittle, rather than a ductile, fracture. The results of this test method are reported in terms of energy absorbed per unit of specimen width (see Note 3). Note 1: The machines with pendulum-type hammers have been standardized in that they must comply with certain requirements including a fixed height of hammer fall, which results in a substantially fixed velocity of the hammer at the moment of impact. Hammers of different initial energies (produced by varying their effective weights), however, are recommended for use with specimens of different impact resistance. Moreover, manufacturers of the equipment are permitted to use different lengths and constructions of pendulums with possible differences in pendulum rigidities resulting (see Section 5). Be aware that other differences in machine design do exist. Note 2: The specimens are standardized in that they have a fixed length and fixed depth, however, the width of the specimens is permitted to vary between limits. One design of milled notch is allowed. The notch in the specimen serves to concentrate the stress, minimize plastic deformation, and direct the fracture to the part of the specimen behind the notch. Scatter in energy-to-break is thus reduced. Because of differences in the elastic and viscoelastic properties of plastics, however, response to a given notch varies among materials. Note 3: Caution must be exercised in interpreting the results of this test method. The following testing parameters have been shown to affect test results significantly: method of specimen fabrication, including but not limited to processing technology, molding conditions, mold design, and thermal treatment; method of notching; speed of notching tool; design of notching apparatus; quality of the notch; time between notching and test; test specimen thickness; test specimen width under notch; and environmental conditioning. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Note 4: This standard resembles ISO 179 in title only. The content is significantly different. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | |
| 페이지수 | 17 |
| Edition | 18 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM D6110-18 REDLINE | Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics | 2018-04-01 | 표준 |
| 2 | ASTM D6110-18 | Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics | 2018-04-01 | 표준 |
| 3 | ASTM D6110-17 | Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics | 2017-12-01 | 구판 |
| 4 | ASTM D6110-10 | Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics | 2010-04-01 | 구판 |
| 5 | ASTM D6110-08 | Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics | 2008-08-01 | 구판 |
| 6 | ASTM D6110-06 | Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics | 2006-03-15 | 구판 |
| 7 | ASTM D6110-05a | Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics | 2005-11-01 | 구판 |
| 8 | ASTM D6110-05 | Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics | 2005-07-01 | 구판 |
| 9 | ASTM D6110-04e1 | Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics | 2004-03-01 | 구판 |
| 10 | ASTM D6110-04 | Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics | 2004-03-01 | 구판 |
| 11 | ASTM D6110-02 | Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics | 2002-08-10 | 구판 |
| 12 | ASTM D6110-97 | Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics | 1997-07-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM D2163-23e1 - Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography 상세보기
ASTM D256-23e1 - Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics 상세보기
ASTM D2887-22e1 - Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography 상세보기
ASTM D5708-15(2020)e1 - Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry 상세보기
ASTM D664-18e2 - Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
