관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
| 분야 | 01.01 : 철강-배관, 튜브, 관이음쇠 |
|---|---|
| 적용범위 | 1.1?This specification2 covers a variety of carbon, alloy, and martensitic stainless steel nuts in the size range?1/4?through 4 in. and metric M12 through M100 nominal. It also covers austenitic stainless steel nuts in the size range?1/4?in. and M12 nominal and above. These nuts are intended for high-pressure or high-temperature service, or both. Grade substitutions without the purchaser's permission are not allowed. 1.2?Bars from which the nuts are made shall be hot-wrought. The material may be further processed by centerless grinding or by cold drawing. Austenitic stainless steel may be solution annealed or annealed and strain-hardened. When annealed and strain hardened austenitic stainless steel is ordered in accordance with Supplementary Requirement S1, the purchaser should take special care to ensure that 8.2.2, Supplementary Requirement S1, and Appendix X1 are thoroughly understood. 1.3?Supplementary requirements of an optional nature are provided. These shall apply only when specified in the inquiry, contract, and order. 1.4?This specification is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units. 1.5?The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. Within the text, the SI units are shown in brackets. 1.6?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 21.060.20 : 너트 |
| 페이지수 | 13 |
| Edition | 23 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A194/A194M-24 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2024-05-01 | 표준 |
| 2 | ASTM A194/A194M-24 REDLINE | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2024-05-01 | 표준 |
| 3 | ASTM A194/A194M-23 REDLINE | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2023-05-01 | 구판 |
| 4 | ASTM A194/A194M-23 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2023-05-01 | 구판 |
| 5 | ASTM A194/A194M-22a | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2022-11-01 | 구판 |
| 6 | ASTM A194/A194M-22a REDLINE | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2022-11-01 | 구판 |
| 7 | ASTM A194/A194M-22 REDLINE | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2022-05-01 | 구판 |
| 8 | ASTM A194/A194M-22 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2022-05-01 | 구판 |
| 9 | ASTM A194/A194M-20a | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2020-05-15 | 구판 |
| 10 | ASTM A194/A194M-20a REDLINE | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2020-05-15 | 구판 |
| 11 | ASTM A194/A194M-20 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2020-05-01 | 구판 |
| 12 | ASTM A194/A194M-18 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2018-11-01 | 구판 |
| 13 | ASTM A194/A194M-18 REDLINE | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2018-11-01 | 구판 |
| 14 | ASTM A194/A194M-17a | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2017-09-01 | 구판 |
| 15 | ASTM A194/A194M-17 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2017-03-15 | 구판 |
| 16 | ASTM A194/A194M-16a | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2016-12-01 | 구판 |
| 17 | ASTM A194/A194M-16 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2016-05-01 | 구판 |
| 18 | ASTM A194/A194M-15a | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2015-11-01 | 구판 |
| 19 | ASTM A194/A194M-15 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2015-06-01 | 구판 |
| 20 | ASTM A194/A194M-14a | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2014-11-01 | 구판 |
| 21 | ASTM A194/A194M-14 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2014-05-01 | 구판 |
| 22 | ASTM A194/A194M-13 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2013-10-01 | 구판 |
| 23 | ASTM A194/A194M-12a | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2012-11-01 | 구판 |
| 24 | ASTM A194/A194M-12 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2012-05-01 | 구판 |
| 25 | ASTM A194/A194M-11 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2011-11-01 | 구판 |
| 26 | ASTM A194/A194M-10a | : Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2010-11-01 | 구판 |
| 27 | ASTM A194/A194M-10 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2010-04-01 | 구판 |
| 28 | ASTM A194/A194M-09 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2009-05-01 | 구판 |
| 29 | ASTM A194/A194M-08b | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2008-08-01 | 구판 |
| 30 | ASTM A194/A194M-08a | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2008-05-01 | 구판 |
| 31 | ASTM A194/A194M-08 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2008-04-01 | 구판 |
| 32 | ASTM A194/A194M-07b | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2007-12-01 | 구판 |
| 33 | ASTM A194/A194M-07a | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2007-03-01 | 구판 |
| 34 | ASTM A194/A194M-07 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2007-02-01 | 구판 |
| 35 | ASTM A194/A194M-06a | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2006-06-15 | 구판 |
| 36 | ASTM A194/A194M-06 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2006-03-15 | 구판 |
| 37 | ASTM A194/A194M-05b | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2005-12-01 | 구판 |
| 38 | ASTM A194/A194M-05a | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2005-09-15 | 구판 |
| 39 | ASTM A194/A194M-05 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2005-07-01 | 구판 |
| 40 | ASTM A194/A194M-04a | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2004-07-01 | 구판 |
| 41 | ASTM A194/A194M-04 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2004-01-01 | 구판 |
| 42 | ASTM A194/A194M-03b | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2003-10-28 | 구판 |
| 43 | ASTM A194/A194M-03 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both | 2003-01-10 | 구판 |
| 44 | ASTM A194/A194M-01a | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both | 2001-10-10 | 구판 |
| 45 | ASTM A194/A194M-00a | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both | 2001-10-10 | 구판 |
| 46 | ASTM A194/A194M-00b | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both | 2001-10-10 | 구판 |
| 47 | ASTM A194/A194M-01 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both | 2001-10-10 | 구판 |
| 48 | ASTM A194/A194M-98b | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 구판 |
관련상품이 존재하지 않습니다.
ASTM A193/A193M-23 - Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 상세보기
ASTM F606/F606M-21 - Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets 상세보기
ASTM A217/A217M-22 - Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service 상세보기
ASTM A403/A403M-22b - Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings 상세보기
ASTM A479/A479M-23a - Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
