사업자등록증
해외표준
FAQ
장바구니
고객센터
해외표준 상세정보
관심표준 등록 : 표준업데이트 시 알림서비스
제공형태 더보기-
구판
판매
ASTM A194/A194M-00a
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both- 발행일 : 2001-10-10
- 발행기관 : ASTM
상세정보
| 분야 | 01.01 : 철강-배관, 튜브, 관이음쇠 |
|---|---|
| 적용범위 | 1.1 This specification covers a variety of carbon, alloy, and martensitic stainless steel nuts in the size range 1/4 through 4 in. and metric M6 through M100 nominal. It also covers austenitic stainless steel nuts in the size range 1/4 in. and M6 nominal and above. These nuts are intended for high-pressure or high-temperature service or both. Grade substitutions without the purchaser's permission are not allowed. 1.2 Bars from which the nuts are made shall be hot-wrought. The material may be further processed by centerless grinding or by cold drawing. Austenitic stainless steel may be solution annealed or annealed and strain-hardened. When annealed and strain hardened austenitic stainless steel is ordered in accordance with Supplementary Requirement S1, the purchaser should take special care to ensure that 7.2.2, Supplementary Requirement S1, and Appendix X1 are thoroughly understood. 1.3 Supplementary requirements (S1 through S6) of an optional nature are provided. These shall apply only when specified in the inquiry, contract, and order. 1.4 This specification is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable" M" specification designation (SI units), the material shall be furnished to inch-pound units. 1.5 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in noncomformance with the specification. |
| 국제분류(ICS)코드 | |
| 페이지수 | 11 |
| Edition | 00a |
이력정보
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A194/A194M-24상세보기 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2024-05-01 | 표준 |
| 2 | ASTM A194/A194M-24 REDLINE상세보기 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2024-05-01 | 표준 |
| 3 | ASTM A194/A194M-23 REDLINE상세보기 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2023-05-01 | 구판 |
| 4 | ASTM A194/A194M-23상세보기 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2023-05-01 | 구판 |
| 5 | ASTM A194/A194M-22a상세보기 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2022-11-01 | 구판 |
| 6 | ASTM A194/A194M-22a REDLINE상세보기 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2022-11-01 | 구판 |
| 7 | ASTM A194/A194M-22상세보기 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2022-05-01 | 구판 |
| 8 | ASTM A194/A194M-22 REDLINE상세보기 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2022-05-01 | 구판 |
| 9 | ASTM A194/A194M-20a REDLINE상세보기 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2020-05-15 | 구판 |
| 10 | ASTM A194/A194M-20a상세보기 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2020-05-15 | 구판 |
| 11 | ASTM A194/A194M-20상세보기 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2020-05-01 | 구판 |
| 12 | ASTM A194/A194M-18 REDLINE상세보기 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2018-11-01 | 구판 |
| 13 | ASTM A194/A194M-18상세보기 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2018-11-01 | 구판 |
| 14 | ASTM A194/A194M-17a상세보기 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2017-09-01 | 구판 |
| 15 | ASTM A194/A194M-17상세보기 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2017-03-15 | 구판 |
| 16 | ASTM A194/A194M-16a상세보기 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2016-12-01 | 구판 |
| 17 | ASTM A194/A194M-16상세보기 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2016-05-01 | 구판 |
| 18 | ASTM A194/A194M-15a상세보기 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2015-11-01 | 구판 |
| 19 | ASTM A194/A194M-15상세보기 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2015-06-01 | 구판 |
| 20 | ASTM A194/A194M-14a상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2014-11-01 | 구판 |
| 21 | ASTM A194/A194M-14상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2014-05-01 | 구판 |
| 22 | ASTM A194/A194M-13상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2013-10-01 | 구판 |
| 23 | ASTM A194/A194M-12a상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2012-11-01 | 구판 |
| 24 | ASTM A194/A194M-12상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2012-05-01 | 구판 |
| 25 | ASTM A194/A194M-11상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2011-11-01 | 구판 |
| 26 | ASTM A194/A194M-10a상세보기 | : Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2010-11-01 | 구판 |
| 27 | ASTM A194/A194M-10상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2010-04-01 | 구판 |
| 28 | ASTM A194/A194M-09상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2009-05-01 | 구판 |
| 29 | ASTM A194/A194M-08b상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2008-08-01 | 구판 |
| 30 | ASTM A194/A194M-08a상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2008-05-01 | 구판 |
| 31 | ASTM A194/A194M-08상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2008-04-01 | 구판 |
| 32 | ASTM A194/A194M-07b상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2007-12-01 | 구판 |
| 33 | ASTM A194/A194M-07a상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2007-03-01 | 구판 |
| 34 | ASTM A194/A194M-07상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2007-02-01 | 구판 |
| 35 | ASTM A194/A194M-06a상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2006-06-15 | 구판 |
| 36 | ASTM A194/A194M-06상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2006-03-15 | 구판 |
| 37 | ASTM A194/A194M-05b상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2005-12-01 | 구판 |
| 38 | ASTM A194/A194M-05a상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2005-09-15 | 구판 |
| 39 | ASTM A194/A194M-05상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2005-07-01 | 구판 |
| 40 | ASTM A194/A194M-04a상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2004-07-01 | 구판 |
| 41 | ASTM A194/A194M-04상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2004-01-01 | 구판 |
| 42 | ASTM A194/A194M-03b상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 2003-10-28 | 구판 |
| 43 | ASTM A194/A194M-03상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both | 2003-01-10 | 구판 |
| 44 | ASTM A194/A194M-01a상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both | 2001-10-10 | 구판 |
| 45 | ASTM A194/A194M-00a상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both | 2001-10-10 | 구판 |
| 46 | ASTM A194/A194M-00b상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both | 2001-10-10 | 구판 |
| 47 | ASTM A194/A194M-01상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both | 2001-10-10 | 구판 |
| 48 | ASTM A194/A194M-98b상세보기 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | 구판 |
관련상품
- 관련상품이 존재하지 않습니다.
다른 사람이 함께 구입한 상품
- 함께 구입한 상품이 존재하지 않습니다.
추천 상품
- IEC TS 63134:2020 - Active assisted living (AAL) use cases
- IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
- KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs)
- KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs)
- KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스
제공형태 닫기
PDF :
직접 파일 다운로드 및 인쇄(마이페이지 확인)보안PDF :
직접 파일 다운로드 및 인쇄(마이페이지 확인)* 단, 파일이동 및 복사 불가, 1회 다운로드 및 인쇄가능PRINT :
인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)BOOK :
인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)ZIP :
압축파일형태로 제공 (PDF, HTML, TXT, XLS 등으로 구성), 직접 파일 다운로드(마이페이지 확인)CD/DVD :
직접 파일 다운로드 및 인쇄(마이페이지 확인)DB :
별도 정보 제공HARDCOPY :
해외 배송 상품, 최대 3주 소요바인더 :
바인더 우편발송, 2~3일 소요온라인구독 :
WEB 접속 후 실시간 열람, 출력(1년간)