관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
| 분야 | 01.02 : 주철-철합금 |
|---|---|
| 적용범위 | 1.1?This specification covers iron-chromium-nickel alloy stainless steel castings intended for particularly severe corrosive applications. 1.2?This specification requires post-weld heat treatment of all weld repairs affecting surfaces intended to be wetted by the corrosive medium. For applications for which post-weld heat treatment is not considered mandatory for retention of acceptable corrosion resistance, refer to Specification A743/A743M. Note 1:?For general corrosion-resistant alloy castings, reference should be made to Specification A743/A743M. For general heat-resistant alloy castings, reference should be made to Specification A297/A297M. For nickel-base alloy castings, refer to Specification A494/A494M. 1.3?The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.3.1?Within the text, the SI units are shown in brackets. 1.3.2?Inch-pound units are applicable for material ordered to Specification A744 and SI units for material ordered to Specification A744M. 1.4?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 77.140.80 : 강 및 주철 및 단조 |
| 페이지수 | 6 |
| Edition | 21a |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A744/A744M-21a | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | 2021-11-01 | 표준 |
| 2 | ASTM A744/A744M-21a REDLINE | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | 2021-11-01 | 표준 |
| 3 | ASTM A744/A744M-21 | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | 2021-03-01 | 구판 |
| 4 | ASTM A744/A744M-21 REDLINE | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | 2021-03-01 | 구판 |
| 5 | ASTM A744/A744M-20a | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | 2020-11-01 | 구판 |
| 6 | ASTM A744/A744M-20a REDLINE | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | 2020-11-01 | 구판 |
| 7 | ASTM A744/A744M-20 | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | 2020-09-01 | 구판 |
| 8 | ASTM A744/A744M-20 REDLINE | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | 2020-09-01 | 구판 |
| 9 | ASTM A744/A744M-13 REDLINE | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | 2013-05-15 | 구판 |
| 10 | ASTM A744/A744M-13 | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | 2013-05-15 | 구판 |
| 11 | ASTM A744/A744M-10e1 | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | 2010-05-01 | 구판 |
| 12 | ASTM A744/A744M-10 | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | 2010-05-01 | 구판 |
| 13 | ASTM A744/A744M-06 | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | 2006-03-01 | 구판 |
| 14 | ASTM A744/A744M-00(2004) | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | 2004-10-01 | 구판 |
| 15 | ASTM A744/A744M-00e1 | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | 2000-09-10 | 구판 |
| 16 | ASTM A744/A744M-98 | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | 2000-09-10 | 구판 |
| 17 | ASTM A744/A744M-00 | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | 2000-09-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM A351/A351M-18e1 - Standard Specification for Castings, Austenitic, for Pressure-Containing Parts 상세보기
ASTM A27/A27M-20 - Standard Specification for Steel Castings, Carbon, for General Application 상세보기
ASTM A743/A743M-21 - Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application 상세보기
ASTM A216/A216M-21 - Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service 상세보기
ASTM A479/A479M-21 - Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
