관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
| 분야 | 01.02 : 주철-철합금 |
|---|---|
| 적용범위 | 1.1?This specification2 covers carbon steel castings for valves, flanges, fittings, or other pressure-containing parts for high-temperature service and of quality suitable for assembly with other castings or wrought steel parts by fusion welding. 1.2?Three grades, WCA, WCB, and WCC, are covered in this specification. Selection will depend upon design and service conditions, mechanical properties, and the high-temperature characteristics. 1.3?The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.4?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 77.140.80 : 강 및 주철 및 단조 |
| 페이지수 | 4 |
| Edition | 21 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A216/A216M-21 | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service | 2021-09-01 | 표준 |
| 2 | ASTM A216/A216M-21 REDLINE | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service | 2021-09-01 | 표준 |
| 3 | ASTM A216/A216M-18 REDLINE | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service | 2018-07-01 | 구판 |
| 4 | ASTM A216/A216M-18 | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service | 2018-07-01 | 구판 |
| 5 | ASTM A216/A216M-16 | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service | 2016-03-01 | 구판 |
| 6 | ASTM A216/A216M-14e1 | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service | 2014-05-01 | 구판 |
| 7 | ASTM A216/A216M-14 | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service | 2014-05-01 | 구판 |
| 8 | ASTM A216/A216M-12 | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service | 2012-11-01 | 구판 |
| 9 | ASTM A216/A216M-08 | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service | 2008-11-01 | 구판 |
| 10 | ASTM A216/A216M-07 | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service | 2007-05-01 | 구판 |
| 11 | ASTM A216/A216M-04 | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service | 2004-10-01 | 구판 |
| 12 | ASTM A216/A216M-93(2003) | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High- Temperature Service | 2003-04-10 | 구판 |
| 13 | ASTM A216/A216M-93(1998) | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High- Temperature Service | 1998-05-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM A105/A105M-21 - Standard Specification for Carbon Steel Forgings for Piping Applications 상세보기
ASTM A217/A217M-22 - Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service 상세보기
ASTM D3517-19 - Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe 상세보기
ASTM A351/A351M-18e1 - Standard Specification for Castings, Austenitic, for Pressure-Containing Parts 상세보기
ASTM A106/A106M-19a - Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
