관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Materials
| 분야 | 14.04 : 시험소 기계 장치; 재료의 퇴화; 여과; SI; 화재 안전 |
|---|---|
| 적용범위 | 1.1?This practice is limited to the basic principles and procedures for operating a xenon arc lamp and water apparatus; on its own, it does not deliver a specific result. 1.2?It is intended to be used in conjunction with a practice or method that defines specific exposure conditions for an application along with a means to evaluate changes in material properties. This practice is intended to reproduce the weathering effects that occur when materials are exposed to sunlight (either direct or through window glass) and moisture as humidity, rain, or dew in actual use. This practice is limited to the procedures for obtaining, measuring, and controlling conditions of exposure. Note 1:?A number of exposure procedures are listed in an appendix; however, this practice does not specify the exposure conditions best suited for the material to be tested. Note 2:?Practice G151 describes general procedures and performance requirements to be used when exposing materials in an apparatus that uses laboratory light sources. 1.3?Test specimens are exposed to light from an optically-filtered xenon arc lamp under controlled environmental conditions. Different types of optical filters in combination with xenon arc light sources are described. 1.4?Specimen preparation and evaluation of the results are covered in ASTM methods or specifications for specific materials. General guidance is given in Practice G151. Note 3:?General information about methods for determining the change in properties after exposure and reporting these results is described in Practice D5870. 1.5?This practice is not intended for corrosion testing of bare metals. 1.6?Units?The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.7?This practice is technically similar to the following ISO documents: ISO 4892-2, ISO 16474-2, ISO 105-B02, ISO 105-B04, ISO 105-B05, ISO 105-B06, and ISO 105-B10. 1.8?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8.1?Should any ozone be generated from the operation of the lamp(s), it shall be carried away from the test specimens and operating personnel by an exhaust system. 1.9?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 19.040 : 환경 시험 |
| 페이지수 | 12 |
| Edition | 21 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM G155-21 | Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Materials | 2021-07-01 | 표준 |
| 2 | ASTM G155-21 REDLINE | Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Materials | 2021-07-01 | 표준 |
| 3 | ASTM G155-13 REDLINE | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials | 2013-06-01 | 구판 |
| 4 | ASTM G155-13 | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials | 2013-06-01 | 구판 |
| 5 | ASTM G155-05a | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials | 2005-10-01 | 구판 |
| 6 | ASTM G155-05 | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials | 2005-07-01 | 구판 |
| 7 | ASTM G155-04a | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials | 2004-10-01 | 구판 |
| 8 | ASTM G155-04 | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials | 2004-02-01 | 구판 |
| 9 | ASTM G155-00a | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials | 2000-08-10 | 구판 |
| 10 | ASTM G155-00 | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials | 2000-08-10 | 구판 |
| 11 | ASTM G155-00ae1 | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials | 2000-08-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM D6695-16 - Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings 상세보기
ASTM E1592-05(2017) - Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference 상세보기
ASTM E330/E330M-14(2021) - Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference 상세보기
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV - Degrees of protection provided by enclosures (IP Code) 상세보기
ISO 16663-1:2009 - Fishing nets — Method of test for the determination of mesh size — Part 1: Opening of mesh 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
