관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
| 분야 | 01.05 : 철강-환봉, 단조품, 베어링, 체인, 스프링 |
|---|---|
| 적용범위 | 1.1 This specification covers untreated and heat-treated carbon and alloy steel forgings for general industrial use. Other ASTM specifications for forgings are available for specific applications such as pressure vessels, railroad use, turbine generators, gearing, and others involving special temperature requirements. 1.2 Hot-rolled or cold finished bars are not within the scope of this specification. 1.3 Six classes of carbon steel and seven classes of alloy steel forgings are listed (see Section 7), which indicates their required heat treatments, as well as mechanical properties. 1.4 Provision, with the suffix H for certification and marking, for the supply of forgings after hardness testing only. 1.5 Supplementary requirements, including those in Specification A788/A788M, of an optional nature are provided. These shall apply only when specified by the purchaser. 1.6 Appendix X1 lists the current classes corresponding to the various classes of Specifications A235, A237, and A243, which have been superseded by this specification. 1.7 The values stated in either SI units or inch-pound units are to be regarded separately as standard; within the text and tables, the SI units are shown in brackets. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.8 Unless the order specifies the applicable “M” specification, the forgings shall be furnished to the inch-pound units. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 77.140.85 : 철강 단조 |
| 페이지수 | 10 |
| Edition | 19a |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A668/A668M-23 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2023-05-01 | 표준 |
| 2 | ASTM A668/A668M-23 REDLINE | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2023-05-01 | 표준 |
| 3 | ASTM A668/A668M-22 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2022-05-15 | 구판 |
| 4 | ASTM A668/A668M-22 REDLINE | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2022-05-15 | 구판 |
| 5 | ASTM A668/A668M-21a | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2021-11-01 | 구판 |
| 6 | ASTM A668/A668M-21a REDLINE | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2021-11-01 | 구판 |
| 7 | ASTM A668/A668M-21 REDLINE | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2021-09-01 | 구판 |
| 8 | ASTM A668/A668M-21 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2021-09-01 | 구판 |
| 9 | ASTM A668/A668M-20a REDLINE | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2020-05-01 | 구판 |
| 10 | ASTM A668/A668M-20a | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2020-05-01 | 구판 |
| 11 | ASTM A668/A668M-20 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2020-03-01 | 구판 |
| 12 | ASTM A668/A668M-20 REDLINE | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2020-03-01 | 구판 |
| 13 | ASTM A668/A668M-19a | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2019-09-01 | 구판 |
| 14 | ASTM A668/A668M-19a REDLINE | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2019-09-01 | 구판 |
| 15 | ASTM A668/A668M-19 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2019-05-01 | 구판 |
| 16 | ASTM A668/A668M-17 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2017-05-01 | 구판 |
| 17 | ASTM A668/A668M-17 REDLINE | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2017-05-01 | 구판 |
| 18 | ASTM A668/A668M-16 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2016-05-01 | 구판 |
| 19 | ASTM A668/A668M-15 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2015-03-01 | 구판 |
| 20 | ASTM A668/A668M-14 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2014-10-01 | 구판 |
| 21 | ASTM A668/A668M-13e1 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2013-06-01 | 구판 |
| 22 | ASTM A668/A668M-13 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2013-06-01 | 구판 |
| 23 | ASTM A668/A668M-04(2009) | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2009-10-01 | 구판 |
| 24 | ASTM A668/A668M-04 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2004-03-01 | 구판 |
| 25 | ASTM A668/A668M-03 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2002-07-10 | 구판 |
| 26 | ASTM A668/A668M-02 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 2002-07-10 | 구판 |
| 27 | ASTM A668/A668M-96e1 | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 1996-05-10 | 구판 |
| 28 | ASTM A668/A668M-96(2001) | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | 1996-05-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM F3125/F3125M-19 - Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength 상세보기
ASTM A193/A193M-19 - Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 상세보기
ASTM A36/A36M-19 - Standard Specification for Carbon Structural Steel 상세보기
ASTM A194/A194M-18 - Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both 상세보기
KS B 0413 - 판재의 프레스 가공품 일반 치수 공차 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
