관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Specification for Carbon Structural Steel
| 분야 | 01.04 : 철강-구조물, 보강재, 압력용기, 철도 |
|---|---|
| 적용범위 | 1.1 This specification2 covers carbon steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of bridges and buildings, and for general structural purposes. 1.2 Supplementary requirements are provided for use where additional testing or additional restrictions are required by the purchaser. Such requirements apply only when specified in the purchase order. 1.3 When the steel is to be welded, a welding procedure suitable for the grade of steel and intended use or service is to be utilized. See Appendix X3 of Specification A6/A6M for information on weldability. 1.4 The text of this specification contains notes or footnotes, or both, that provide explanatory material. Such notes and footnotes, excluding those in tables and figures, do not contain any mandatory requirements. 1.5 For structural products produced from coil and furnished without heat treatment or with stress relieving only, the additional requirements, including additional testing requirements and the reporting of additional test results, of Specification A6/A6M apply. 1.6 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system is to be used independently of the other, without combining values in any way. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 77.140.10 : 열처리용 강 |
| 페이지수 | 3 |
| Edition | 19 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A36/A36M-19 | Standard Specification for Carbon Structural Steel | 2019-07-01 | 표준 |
| 2 | ASTM A36/A36M-19 REDLINE | Standard Specification for Carbon Structural Steel | 2019-07-01 | 표준 |
| 3 | ASTM A36/A36M-14 | Standard Specification for Carbon Structural Steel | 2014-12-01 | 구판 |
| 4 | ASTM A36/A36M-14 REDLINE | Standard Specification for Carbon Structural Steel | 2014-12-01 | 구판 |
| 5 | ASTM A36/A36M-12 | Standard Specification for Carbon Structural Steel | 2012-11-01 | 구판 |
| 6 | ASTM A36/A36M-08 | Standard Specification for Carbon Structural Steel | 2008-05-15 | 구판 |
| 7 | ASTM A36/A36M-05 | Standard Specification for Carbon Structural Steel | 2005-03-01 | 구판 |
| 8 | ASTM A36/A36M-04 | Standard Specification for Carbon Structural Steel | 2004-04-01 | 구판 |
| 9 | ASTM A36/A36M-03a | Standard Specification for Carbon Structural Steel | 2003-05-10 | 구판 |
| 10 | ASTM A36/A36M-03 | Standard Specification for Carbon Structural Steel | 2003-04-10 | 구판 |
| 11 | ASTM A36/A36M-02 | Standard Specification for Carbon Structural Steel | 2002-12-10 | 구판 |
| 12 | ASTM A36/A36M-00a | Standard Specification for Carbon Structural Steel | 2001-09-10 | 구판 |
| 13 | ASTM A36/A36M-01 | Standard Specification for Carbon Structural Steel | 2001-09-10 | 구판 |
| 14 | ASTM A36/A36M-97ae1 | Standard Specification for Carbon Structural Steel | 구판 |
관련상품이 존재하지 않습니다.
ASTM A123/A123M-17 - Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products 상세보기
ASTM A193/A193M-20 - Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications 상세보기
ASTM A351/A351M-18e1 - Standard Specification for Castings, Austenitic, for Pressure-Containing Parts 상세보기
ASTM A194/A194M-20a - Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both 상세보기
ASTM A53/A53M-20 - Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
