관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents
| 분야 | 13.01 : 의료기, 외과용 도구 및 장비 |
|---|---|
| 적용범위 | 1.1 The purpose of this test method is to quantify the percentage by which the diameter of a stent decreases from its expanded diameter while still on the delivery balloon to its relaxed diameter after deflating the balloon. This test method is appropriate for stents manufactured from a material that is plastically deformed when the stent's diameter is increased from its predeployed size to its postdeployed size by mechanical means. This test method may be performed in air at room temperature unless there is a known temperature dependence of the material, in which case, the temperature at which the test is conducted shall be stated in the report. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 11.040.20 : 수혈. 주입. 주사장비 |
| 페이지수 | 3 |
| Edition | 09(2017) |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM F2079-09(2022) | Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents | 2022-10-01 | 표준 |
| 2 | ASTM F2079-09(2017) | Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents | 2017-09-01 | 구판 |
| 3 | ASTM F2079-09(2013) | Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents | 2013-03-01 | 구판 |
| 4 | ASTM F2079-09 | Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents | 2009-08-01 | 구판 |
| 5 | ASTM F2079-02(2008) | Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents | 2008-05-01 | 구판 |
| 6 | ASTM F2079-02 | Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents | 2002-05-10 | 구판 |
| 7 | ASTM F2079-01 | Standard Test Method for Measuring Recoil of Balloon-Expandable Stents | 2001-01-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM F2004-17 - Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis 상세보기
ASTM F2394-07(2017) - Standard Guide for Measuring Securement of Balloon Expandable Vascular Stent Mounted on Delivery System 상세보기
ASTM F2081-06(2017) - Standard Guide for Characterization and Presentation of the Dimensional Attributes of Vascular Stents 상세보기
ASTM F2082/F2082M-16 - Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery 상세보기
ASTM F746-04(2014) - Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
