관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
분야 | 05.02 : 석유제품 및 윤활유 (Ⅱ) |
---|---|
적용범위 | 1.1 This test method covers the determination of pour point of petroleum products by an automatic instrument that applies a controlled burst of nitrogen gas onto the specimen surface while the specimen is being cooled and detects movement of the surface of the test specimen with an optical device. 1.2 This test method is designed to cover the range of temperatures from −57 °C to +51 °C. However, the range of temperatures included in the 1992 interlaboratory test program only covered the temperature range from −39 °C to +6 °C and the range of temperatures included in the 1998 interlaboratory test program was from −51 °C to −11 °C. (see 13.4). 1.3 Test results from this test method can be determined at 1 °C or 3 °C testing intervals. 1.4 This test method is not intended for use with crude oils. Note 1: The applicability of this test method or residual fuel samples has not been verified. For further information on applicability, refer to 13.4. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
국제분류(ICS)코드 | 75.080 : 석유제품 일반 |
페이지수 | 6 |
Edition | 16 |
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | ASTM D5949-16(2022) | Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) | 2022-07-01 | 표준 |
2 | ASTM D5949-16 | Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) | 2016-04-01 | 구판 |
3 | ASTM D5949-16 REDLINE | Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) | 2016-04-01 | 구판 |
4 | ASTM D5949-14 | Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) | 2014-05-01 | 구판 |
5 | ASTM D5949-10 | Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) | 2010-05-15 | 구판 |
6 | ASTM D5949-08 | Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) | 2008-12-01 | 구판 |
7 | ASTM D5949-01e1 | Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) | 2001-12-10 | 구판 |
8 | ASTM D5949-01 | Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) | 2001-12-10 | 구판 |
9 | ASTM D5949-96 | Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) | 2001-12-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM D5972-16 - Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method) 상세보기
ASTM D4294-16e1 - Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry 상세보기
ASTM D156-15 - Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) 상세보기
ASTM D4176-04(2014) - Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) 상세보기
ASTM D5950-14 - Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기