관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
| 분야 | 01.03 : 철강-강판, 강대 및 강선 |
|---|---|
| 적용범위 | 1.1 These practices cover the following five tests: 1.1.1 Practice A—Oxalic Acid Etch Test for Classification of Etch Structures of Austenitic Stainless Steels (Sections 4 to 13, inclusive), 1.1.2 Practice B—Ferric Sulfate-Sulfuric Acid Test for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels (Sections 14 to 25, inclusive), 1.1.3 Practice C—Nitric Acid Test for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels (Sections 26 to 36, inclusive), 1.1.4 Practice E—Copper–Copper Sulfate–Sulfuric Acid Test for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels (Sections 37 to 46, inclusive), and 1.1.5 Practice F—Copper–Copper Sulfate–50 % Sulfuric Acid Test for Detecting Susceptibility to Intergranular Attack in Molybdenum-Bearing Austenitic Stainless Steels (Sections 47 to 58, inclusive). 1.2 The Oxalic Acid Etch Test is a rapid method of identifying, by simple etching, those specimens of certain stainless steel grades that are essentially free of susceptibility to intergranular attack associated with chromium carbide precipitates. These specimens will have low corrosion rates in certain corrosion tests and therefore can be eliminated (screened) from testing as “acceptable.” The etch test is applicable only to those grades listed in the individual hot acid tests and classifies the specimens either as “acceptable” or as “suspect.” 1.3 The ferric sulfate-sulfuric acid test, the copper–copper sulfate–50 % sulfuric acid test, and the nitric acid test are based on weight loss determinations and, thus, provide a quantitative measure of the relative performance of specimens evaluated. In contrast, the copper–copper sulfate–16 % sulfuric acid test is based on visual examination of bend specimens and, therefore, classifies the specimens only as acceptable or nonacceptable. 1.4 The presence or absence of intergranular attack in these tests is not necessarily a measure of the performance of the material in other corrosive environments. These tests do not provide a basis for predicting resistance to forms of corrosion other than intergranular, such as general corrosion, pitting, or stress-corrosion cracking. Note 1: See Appendix X1 for information regarding test selection. 1.5 The values stated in SI units are to be regarded as standard. The inch-pound equivalents are in parentheses and may be approximate. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Some specific hazards statements are given in 10.1, 20.1.1, 20.1.9, 31.3, 34.4, 53.1.1, and 53.1.10. |
| 국제분류(ICS)코드 | 77.140.20 : 고품질 강 |
| 페이지수 | 20 |
| Edition | 15 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A262-15(2021) | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | 2021-09-01 | 표준 |
| 2 | ASTM A262-15 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | 2015-09-01 | 구판 |
| 3 | ASTM A262-15 REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | 2015-09-01 | 구판 |
| 4 | ASTM A262-14 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | 2014-07-01 | 구판 |
| 5 | ASTM A262-13 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | 2013-05-01 | 구판 |
| 6 | ASTM A262-10 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | 2010-04-01 | 구판 |
| 7 | ASTM A262-02a(2008) | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | 2008-03-01 | 구판 |
| 8 | ASTM A262-02ae2 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | 2002-11-10 | 구판 |
| 9 | ASTM A262-02ae3 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | 2002-11-10 | 구판 |
| 10 | ASTM A262-02ae1 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | 2002-11-10 | 구판 |
| 11 | ASTM A262-02a | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | 2002-11-10 | 구판 |
| 12 | ASTM A262-02 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | 2002-06-10 | 구판 |
| 13 | ASTM A262-98 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | 2001-09-10 | 구판 |
| 14 | ASTM A262-01 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | 2001-09-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM A450/A450M-18a REDLINE - Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes 상세보기
ASTM E426-16 REDLINE - Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys 상세보기
ASTM A700-14(2019) - Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment 상세보기
ASTM A270/A270M-15(2019) - Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing 상세보기
ASTM A1016/A1016M-18a - Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
