관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading
| 분야 | 13.02 : 긴급 의료 서비스; 수색 및 구조 |
|---|---|
| 적용범위 | 1.1 Purpose—This guide establishes general requirements and considerations for the development of finite element models used in the evaluation of the performance of a metallic vascular stent design under uniform radial loading. Suggested criteria are provided for evaluating the typical cases of metallic stents under uniform radially oriented and pulsatile loading. Recommended procedures for checking and validating the finite element model(s) are provided as a means to assess the model and analysis results. Finally, the recommended content of an engineering report covering the mechanical simulations is presented. 1.2 Limits: 1.2.1 This guide is limited in discussion to the finite element structural analysis of metallic stents of the following types: 1.2.1.1 Plastically deformable metal stents. 1.2.1.2 Self-expanding metal stents. 1.2.1.3 Plastically deformable metal portions of covered stents. 1.2.1.4 Metal portions of self-expanding covered metal stents. 1.2.2 The emphasis of the techniques described in this guide is intended for both elasto-plastic materials such as stainless steel, and superelastic materials such as nitinol. Unique concerns associated with stents designed for shape memory behavior are not addressed within this guide. 1.2.3 This guide does not consider changes to possible time varying conditions or different loadings related to vascular remodeling. 1.2.4 This guide is restricted to cases that involve the application of uniform radially oriented loading. 1.2.5 This guide does not provide guidance in the application or interpretation of FEA in determining fatigue life. 1.2.6 This guide is not intended to include complete descriptions of the finite element method, nor its theoretical basis and formulation. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. |
| 국제분류(ICS)코드 | 11.040.40 : 외과. 보철술. 교정술용 이식 |
| 페이지수 | 8 |
| Edition | 08(2014) |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM F2514-21 | Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading | 2021-08-01 | 표준 |
| 2 | ASTM F2514-21 REDLINE | Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading | 2021-08-01 | 표준 |
| 3 | ASTM F2514-08(2014) | Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading | 2014-03-01 | 구판 |
| 4 | ASTM F2514-08 | Standard Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading | 2008-07-15 | 구판 |
관련상품이 존재하지 않습니다.
ASTM F2394-07(2017) - Standard Guide for Measuring Securement of Balloon Expandable Vascular Stent Mounted on Delivery System 상세보기
ASTM F2743-11(2018) - Standard Guide for Coating Inspection and Acute Particulate Characterization of Coated Drug-Eluting Vascular Stent Systems 상세보기
ASTM F2081-06(2017) - Standard Guide for Characterization and Presentation of the Dimensional Attributes of Vascular Stents 상세보기
ASTM F2079-09(2017) - Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents 상세보기
ASTM F2082/F2082M-16 - Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
