ASTM F1524-95(2013) Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills

관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.

PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)

PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

구판 판매

ASTM F1524-95(2013)

Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills

- 발행일 : 2013-04-01
- 발행기관 : ASTM

언어	제공형태	판매가격	선택
영어	PDF	112,900원
영어	PRINT	112,900원

장바구니 담기

상품이 장바구니에 담겼습니다.

장바구니로 이동

상세정보

분야	11.08 : 농약, 항생 및 대체방제제; 유해 물질 및 기름 유출 대응
적용범위	1.1 This guide covers the considerations for advanced oxidation processes (AOPs) in the mitigation of spilled chemicals and hydrocarbons dissolved into ground and surface waters. 1.2 This guide addresses the application of advanced oxidation alone or in conjunction with other technologies. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. In addition, it is the responsibility of the user to ensure that such activity takes place under the control and direction of a qualified person with full knowledge of any potential safety and health protocols.
국제분류(ICS)코드	71.060.20 : 산화물
페이지수	4
Edition	95(2013)

이력정보

No.	표준번호	표준명	발행일	상태
1	ASTM F1524-22	Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills	2022-01-01	표준
2	ASTM F1524-22 REDLINE	Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills	2022-01-01	표준
3	ASTM F1524-95(2013)	Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills	2013-04-01	구판
4	ASTM F1524-95(2007)	Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills	2007-11-01	구판
5	ASTM F1524-95	Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills	1995-05-15	구판
6	ASTM F1524-95(2001)	Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills	1995-05-15	구판

관련상품

관련상품이 존재하지 않습니다.
다른 사람이 함께 구입한 상품

ASTM D4195-08(2014) - Standard Guide for Water Analysis for Reverse Osmosis and Nanofiltration Application (Withdrawn 2023) 상세보기

ASTM D4188-17 - Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test in Water 상세보기

ISO 16784-2:2006 - Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig 상세보기

ISO 21630:2007 - Pumps — Testing — Submersible mixers for wastewater and similar applications 상세보기

ISO 24516-4:2019 - Guidelines for the management of assets of water supply and wastewater systems — Part 4: Wastewater treatment plants, sludge treatment facilities, pumping stations, retention and detention facilities 상세보기
추천 상품

IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기

IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기

KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기

KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기

KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기

해외표준

ASTM F1524-95(2013)

상세정보

이력정보

관련상품

다른 사람이 함께 구입한 상품

추천 상품

전체서비스 보기