한국표준정보망(KSSN)

관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.

PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)

PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

초안 판매

Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 2: Array probes

언어	제공형태	판매가격	선택
영어	PDF	100,300원
영어	PRINT	100,300원

장바구니 담기

상품이 장바구니에 담겼습니다.

장바구니로 이동

분야	ISO/TC 135/SC 3 : Ultrasonic testing
적용범위	This document specifies the characterization tests performed at the end of the fabrication of an array probe. It defines both methodology and acceptance criteria. This document is applicable to the following array probes used for ultrasonic non-destructive testing (phased array technique or signal processing technique, e.g. FMC-TFM) in contact technique (with or without a wedge or delay line) or in immersion technique, with centre frequencies in the range 0,5 MHz to 10 MHz: a) array probes with elements in one direction: — 1-D-linear array (linear array); — 1-D-curved array; — annular array; b) array probes with elements in two directions: — 2-D-array (matrix array); — sectorial annular array; — partial sectorial annular array. This document does not give methods and acceptance criteria to characterize the performance of an ultrasonic phased array instrument or the performance of a combined system. These are given in ISO 18563–1 and in ISO 18563–3.
국제분류(ICS)코드	19.100 : 비파괴 시험 및 기구
페이지수	10
Edition	2

No.	표준번호	표준명	발행일	상태
1	ISO 18563-2:2017	Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 2: Probes	2017-07-24	표준
2	ISO 18563-2	Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 2: Array probes		초안