관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Industrial trucks — Safety requirements and verification — Part 4: Driverless industrial trucks and their systems
| 분야 | ISO/TC 110/SC 2 : Safety of powered industrial trucks |
|---|---|
| 적용범위 | This document specifies safety requirements and the means for their verification for driverless industrial trucks (hereafter referred to as trucks) and their systems. Examples of driverless industrial trucks (trucks as defined in ISO 5053‑1:2020) include: “automated guided vehicle”, “autonomous mobile robot”, “bots”, “automated guided cart”, “tunnel tugger”, “under cart”, etc. This document is also applicable to driverless industrial trucks which are provided with: — automatic modes which either require operators’ action(s) to initiate or enable such automatic operations; — the capability to transport one or more riders (which are neither considered as drivers nor as operators); — additional manual modes which allow operators to operate the truck manually; or — a maintenance mode which allows manual operation of truck functions for maintenance reasons. This document is not applicable to trucks solely guided by mechanical means (rails, guides, etc.) or to remotely-controlled trucks, which are not considered to be driverless trucks. For the purposes of this document, a driverless industrial truck is a powered truck, which is designed to operate automatically. A driverless truck system comprises the control system, which can be part of the truck and/or separate from it, guidance means and power system. Requirements for power sources are not covered in this document. The condition of the operating zone has a significant effect on the safe operation of the driverless industrial truck. The preparations of the operating zone to eliminate the associated hazards are specified in Annex A. This document is applicable to all significant hazards, hazardous situations or hazardous events during all phases of the life of the truck (ISO 12100:2010, 5.4), as listed in Annex B, relevant to the applicable machines when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. In particular, this document does not apply to significant hazards related to: — noise; — vibrations; — ionising and non-ionising radiation; — laser radiation; — sales literature (commercial documents); — declaration of vibrations transmitted by mobile machinery. It does not apply to additional hazards that can occur: — during operation in severe conditions (e.g. extreme climates, freezer applications, strong magnetic fields); — during operation in nuclear environments; — from trucks intended to operate in public zones (see in particular ISO 13482:2014); — during operation on a public road; — during operation in potentially explosive environments; — during operation in military applications; — during operation with specific hygienic requirements; — during operation in ionizing radiation environments; — during the transportation of (a) person(s) other than (the) intended rider(s); — when handling loads the nature of which can lead to dangerous situations (e.g. molten metals, acids/bases, radiating materials); — for rider positions with elevation function higher than 1 200 mm from the floor/ground to the platform floor. This document does not contain safety requirements for trailer(s) being towed behind a truck. This document does not contain safety requirements for elevated operator trucks. This document does not apply to trucks manufactured before the date of its publication. |
| 국제분류(ICS)코드 | 53.060 : 산업용 트럭 |
| 페이지수 | 74 |
| Edition | 2 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 3691-4:2023 | Industrial trucks — Safety requirements and verification — Part 4: Driverless industrial trucks and their systems | 2023-06-12 | 표준 |
| 2 | ISO 3691-4:2020 | Industrial trucks — Safety requirements and verification — Part 4: Driverless industrial trucks and their systems | 2020-02-17 | 구판 |
ISO 3691-1:2011/DAmd 2 - Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks — Amendment 2 상세보기
ISO/DIS 3691-1 - Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks 상세보기
ISO 3691-1:2011 - Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks 상세보기
ISO/TS 3691-7:2011 - Industrial trucks — Safety requirements and verification — Part 7: Regional requirements for countries within the European Community 상세보기
ISO 3691-1:2011/Cor 1:2013 - 상세보기
ISO 13849-1:2023 - Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design 상세보기
IEC 60704-2-1:2020 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for dry vacuum cleaners 상세보기
IEC/ASTM 62885-7:2020+AMD1:2022 CSV - Surface cleaning appliances - Part 7: Dry cleaning robots for household or similar use - Methods for measuring the performance 상세보기
ISO 16750-2:2023 - Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads 상세보기
ISO 16750-1:2023 - Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 1: General 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
