관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties
| 분야 | ISO/TC 181 : Safety of toys |
|---|---|
| 적용범위 | The requirements in ISO 8124-1:2018 apply to all toys, i.e. any product or material designed or clearly intended for use in play by children under 14 years of age. They are applicable to a toy as it is initially received by the consumer and, in addition, they apply after a toy is subjected to reasonably foreseeable conditions of normal use and abuse unless specifically noted otherwise. The requirements of this document specify acceptable criteria for structural characteristics of toys, such as shape, size, contour, spacing (e.g. rattles, small parts, sharp points and edges, and hinge-line clearances) as well as acceptable criteria for properties peculiar to certain categories of toy (e.g. maximum kinetic energy values for non-resilient-tipped projectiles and minimum tip angles for certain ride-on toys). ISO 8124-1:2018 specifies requirements and test methods for toys intended for use by children in various age groups from birth to 14 years. The requirements vary according to the age group for which a particular toy is intended. The requirements for a particular age group reflect the nature of the hazards and the expected mental and/or physical abilities of a child to cope with them. ISO 8124-1:2018 also requires that appropriate warnings and/or instructions for use be given on certain toys or their packaging. Due to linguistic problems which may occur in different countries, the wording of these warnings and instructions is not specified but given as general information in Annex B. It should be noted that different legal requirements exist in many countries with regard to such marking. ISO 8124-1:2018 does not purport to cover or include every conceivable potential hazard of a particular toy or toy category. Except for labelling requirements indicating the functional hazards and the age range for which the toy is intended, this document has no requirements for those characteristics of toys which represent an inherent and recognized hazard which is integral to the function of the toy. EXAMPLE 1 An example of such a hazard is the sharp point necessary for the proper function of a needle. The needle is a hazard which is well understood by the purchaser of a toy sewing kit, and the functional sharp-point hazard is communicated to the user as part of the normal educational process of learning to sew as well as at the point of purchase by means of cautionary labelling on the product's packaging. EXAMPLE 2 As a further example, a two-wheeled toy scooter has inherent and recognized hazards associated with its use (e.g. instability during use, especially while learning). The potential hazards associated with its structural characteristics (sharp edges, pinch hazards, etc.) will be minimized by compliance with the requirements of this document. |
| 국제분류(ICS)코드 | 97.200.50 : 완구 |
| 페이지수 | 150 |
| Edition | 5 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 8124-1:2022 | Safety of toys — Part 1: Safety aspects related to mechanical and physical properties | 2022-09-15 | 표준 |
| 2 | ISO 8124-1:2018/Amd 1:2020 | Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1: Flying toys | 2020-06-17 | 구판 |
| 3 | ISO 8124-1:2018/Amd 2:2020 | Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 2: Various | 2020-06-15 | 구판 |
| 4 | ISO 8124-1:2018 | Safety of toys — Part 1: Safety aspects related to mechanical and physical properties | 2018-03-07 | 구판 |
| 5 | ISO 8124-1:2014 | Safety of toys — Part 1: Safety aspects related to mechanical and physical properties | 2014-12-17 | 구판 |
| 6 | ISO 8124-1:2012 | Safety of toys — Part 1: Safety aspects related to mechanical and physical properties | 2012-09-24 | 구판 |
| 7 | ISO 8124-1:2009/Amd 2:2012 | Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 2: Magnets | 2012-03-09 | 구판 |
| 8 | ISO 8124-1:2009/Amd 1:2011 | Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1 | 2011-12-09 | 구판 |
| 9 | ISO 8124-1:2009 | Safety of toys — Part 1: Safety aspects related to mechanical and physical properties | 2009-03-11 | 구판 |
| 10 | ISO 8124-1:2000/Amd 1:2007 | Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1 | 2007-05-31 | 구판 |
| 11 | ISO 8124-1:2000/Amd 2:2007 | Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 2 | 2007-05-31 | 구판 |
| 12 | ISO 8124-1:2000 | Safety of toys — Part 1: Safety aspects related to mechanical and physical properties | 2000-03-23 | 구판 |
| 13 | ISO 8124-1:2022/DAmd 1 | Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1 | 초안 |
ISO/FDIS 8124-4 - Safety of toys — Part 4: Activity toys for domestic use 상세보기
ISO 8124-1:2022/DAmd 1 - Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1 상세보기
ISO/DIS 8124-5 - Safety of toys — Part 5: Determination of total concentration of certain elements in toys 상세보기
ISO 8124-4:2014 - Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use 상세보기
ISO 8124-5:2015 - Safety of toys — Part 5: Determination of total concentration of certain elements in toys 상세보기
ASTM F2853-10(2015) - Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams 상세보기
ASTM F963-17 - Standard Consumer Safety Specification for Toy Safety 상세보기
BS EN 71-2:2011+A1:2014 - Safety of toys. Flammability. 상세보기
ISO 8124-5:2015 - Safety of toys — Part 5: Determination of total concentration of certain elements in toys 상세보기
ISO 8124-7:2015 - Safety of toys — Part 7: Requirements and test methods for finger paints 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
