관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints
| 분야 | ISO/TC 44/SC 5 : Testing and inspection of welds |
|---|---|
| 적용범위 | ISO 9015-2:2016 specifies microhardness testing on transverse sections of welded joints of metallic materials with high hardness gradients. It covers Vickers hardness tests in accordance with ISO 6507‑1, normally with test loads of 0,98 N to less than 49 N (HV 0,1 to less than HV 5). NOTE Testing ensures that the highest and/or the lowest level of hardness of both parent materials (in the case of dissimilar materials both parent materials) and weld metal is determined. ISO 9015-2:2016 is not applicable to hardness testing of welds with loads of 49,03 N and above, which is covered by ISO 9015‑1. ISO 9015-2:2016 is not applicable to Vickers hardness testing of resistance spot, projection and seam welds, which is covered by ISO 14271. This part of ISO 9015 is not applicable to hardness testing of very narrow welds, e.g. those typically produced by laser and electron beam welding (see ISO 22826). |
| 국제분류(ICS)코드 | 25.160.40 : 용접이음 |
| 페이지수 | 8 |
| Edition | 2 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 9015-2:2016 | Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints | 2016-01-28 | 표준 |
| 2 | ISO 9015-2:2003 | Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints | 2003-11-11 | 구판 |
ISO 9015-1:2001 - Destructive tests on welds in metallic materials — Hardness testing — Part 1: Hardness test on arc welded joints 상세보기
ISO 9015-1:2001 - Destructive tests on welds in metallic materials — Hardness testing — Part 1: Hardness test on arc welded joints 상세보기
ISO 9018:2015 - Destructive tests on welds in metallic materials — Tensile test on cruciform and lapped joints 상세보기
ISO 5178:2019 - Destructive tests on welds in metallic materials — Longitudinal tensile test on weld metal in fusion welded joints 상세보기
II-A 재료표준-2019 상세보기
ASTM E18-19 - Standard Test Methods for Rockwell Hardness of Metallic Materials 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
