관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Interior air of road vehicles — Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature — Small chamber method
| 분야 | ISO/TC 146/SC 6 : Indoor air |
|---|---|
| 적용범위 | ISO 12219-6:2017 describes a qualitative and quantitative analytical method for vapour-phase organic compounds released from car trim materials under simulated real use conditions, i.e. a vehicle is parked for several hours in direct sunlight. Under these conditions, some interior parts and materials reach higher temperatures than 65 °C (ISO 12219‑4), e.g. a dashboard can reach temperatures up to 120 °C. This document can be implemented as an optional addition to ISO 12219‑4 so that VOC, volatile carbonyl and SVOC testing can all be completed within one day. This part has been added to gain insight into the emission behaviour and emission potential of selected vehicle interior parts and materials exposed to higher temperatures. (By convention, 100 °C is set as the higher temperature.) The test is performed in small emission test chambers (small chambers). These small chambers are intended to provide a transfer function for vehicle level emissions. This method is intended for evaluating new car interior trim components but can, in principle, be applied to used car components. The specified analytical procedure for SVOCs and semi-volatile carbonyls is ISO 16000‑6. ISO 12219-6:2017 is complementary to existing standards[1],[2] and provides third party test laboratories and manufacturing industry with an approach for - identifying the effect of real use conditions on specific VOC and SVOC emissions data, - comparing emissions from various assemblies with regards to specific VOC and SVOC emissions, - evaluating and sorting specific assemblies regarding specific VOC and SVOC emissions data, - providing specific VOC and SVOC emissions data to develop and verify a correlation between component level methods and in vehicle air quality and - evaluating prototype, "low-emission" assemblies during development. The method described can be exclusively performed as a high temperature test or it can be performed in combination with the determination of VOCs at 65 °C in one run, which is described in ISO 12219‑4. |
| 국제분류(ICS)코드 |
13.040.20 : 대기 환경
43.020 : 도로 수송 일반 |
| 페이지수 | 17 |
| Edition | 1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 12219-6:2017 | Interior air of road vehicles — Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature — Small chamber method | 2017-02-27 | 표준 |
ISO/FDIS 12219-11 - Interior air of road vehicles — Part 11: Thermal desorption analysis of organic emissions for the characterization on non-metallic materials for vehicles 상세보기
ISO/DIS 12219-12 - Interior air of road vehicles — Part 12: Artificial leather made from PVC or Polyurethane— Specification and methods for the determination of fogging characteristics of trim materials in the interior of automobiles 상세보기
ISO 12219-2:2012 - Interior air of road vehicles — Part 2: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Bag method 상세보기
ISO 12219-3:2012 - Interior air of road vehicles — Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Micro-scale chamber method 상세보기
ISO 12219-4:2013 - Interior air of road vehicles — Part 4: Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Small chamber method 상세보기
ISO 12219-10:2021 - Interior air of road vehicles — Part 10: Whole vehicle test chamber — Specification and methods for the determination of volatile organic compounds in cabin interiors — Trucks and buses 상세보기
ISO 12219-9:2019 - Interior air of road vehicles — Part 9: Determination of the emissions of volatile organic compounds from vehicle interior parts — Large bag method 상세보기
ISO 12219-8:2018 - Interior air of road vehicles — Part 8: Handling and packaging of materials and components for emission testing 상세보기
ISO 12219-7:2017 - Interior air of road vehicles — Part 7: Odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements 상세보기
ISO 12219-5:2014 - Interior air of road vehicles — Part 5: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Static chamber method 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
