관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Eye and face protection for occupational use — Part 1: General requirements
| 분야 | ISO/TC 94/SC 6 : Eye and face protection |
|---|---|
| 적용범위 | This document specifies general requirements for eye and face protectors. These protectors are intended to provide protection for the eyes and faces of persons against one or more common occupational hazards such as impacts from flying particles and fragments, optical radiation, dusts, splashing liquids, molten metals, heat, flame, hot solids, harmful gases, vapours and aerosols. Additional requirements for eye and face protectors used during welding and related techniques and for mesh protectors are given in ISO 16321-2 and ISO 16321-3, respectively. ISO 16321-4 provides requirements and guidance on protectors against biological hazards1). This document applies to: — all plano as well as corrective and prescription lensed protectors and components; — those eye and face protectors used for occupational-type tasks that are performed similarly to an occupation, e.g. "do-it-yourself"; — those eye and face protectors used in educational establishments. This document does not apply to: — protectors specifically intended for protection against only solar radiation and used in non- occupational environments for which the ISO 12312 series applies; — protectors for medically prescribed applications (not occupational), e.g. eye protection for severe dry eye, tints prescribed for medical conditions; — patient eye protectors during diagnosis or treatment (e.g. ISO/TR 22463); — protectors for use during medical or e.g. aesthetic applications, e.g. intense light sources (ILS) for which the ISO 12609 series applies; — protectors specifically intended for sports for which the ISO 18527 series applies; — laser protectors; — face protectors intended for live-working to protect against short-circuit electric arcs for which IEC 62819 applies; — protectors intended to protect against ionizing radiation, e.g. X-rays, for which IEC 61331-3 applies. 1) In preparation. |
| 국제분류(ICS)코드 | 13.340.20 : 보호 장비 |
| 페이지수 | 40 |
| Edition | 1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 16321-1:2021/Amd 1:2024 | Eye and face protection for occupational use — Part 1: General requirements — Amendment 1 | 2024-07-05 | 표준 |
| 2 | ISO 16321-1:2021 | Eye and face protection for occupational use — Part 1: General requirements | 2021-03-02 | 표준 |
ISO/FDIS 16321-4 - Eye and face protection — Part 4: Protection against biological hazards 상세보기
ISO 16321-2:2021 - Eye and face protection for occupational use — Part 2: Additional requirements for protectors used during welding and related techniques 상세보기
ISO 16321-3:2021 - Eye and face protection for occupational use — Part 3: Additional requirements for mesh protectors 상세보기
ISO 16321-1:2021/Amd 1:2024 - Eye and face protection for occupational use — Part 1: General requirements — Amendment 1 상세보기
ISO 12312-3:2022 - Eye and face protection — Sunglasses and related eyewear — Part 3: Sunglasses for running, cycling and similar active lifestyles 상세보기
ISO 18526-4:2020 - Eye and face protection — Test methods — Part 4: Headforms 상세보기
ISO 16321-3:2021 - Eye and face protection for occupational use — Part 3: Additional requirements for mesh protectors 상세보기
ISO 16321-2:2021 - Eye and face protection for occupational use — Part 2: Additional requirements for protectors used during welding and related techniques 상세보기
BS EN ISO 12312-1:2022 - TC - Tracked Changes. Eye and face protection. Sunglasses and related eyewear. Sunglasses for general use. 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
