관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation
| 분야 | ISO/TC 43/SC 2 : Building acoustics |
|---|---|
| 적용범위 | ISO 16283-2:20015 specifies procedures to determine the impact sound insulation using sound pressure measurements with an impact source operating on a floor or stairs in a building. These procedures are intended for room volumes in the range from 10 m3 to 250 m3 in the frequency range from 50 Hz to 5 000 Hz. The test results can be used to quantify, assess and compare the impact sound insulation in unfurnished or furnished rooms where the sound field might, or might not approximate to a diffuse field. Two impact sources are described: the tapping machine and the rubber ball. These impact sources do not exactly replicate all possible types of real impacts on floors or stairs in buildings. The tapping machine can be used to assess a variety of light, hard impacts such as footsteps from walkers wearing hard-heeled footwear or dropped objects. A single number quantity can be calculated using the rating procedures in ISO 717‑2. This single number quantity links the measured impact sound insulation using the tapping machine to subjective assessment of general impacts in dwellings that occur on floors or stairs in a building. The tapping machine is also well-suited to the prediction of impact sound insulation using ISO 15712‑2. These two aspects facilitate the specification of impact sound insulation in national building requirements using only measurements with the tapping machine as an impact source. The rubber ball can be used to assess heavy, soft impacts such as from walkers in bare feet or children jumping, as well as quantifying absolute values that can be related to human disturbance in terms of a Fast time-weighted maximum sound pressure level. At present, calculation procedures for a single number quantity do not currently exist in an ISO Standard. |
| 국제분류(ICS)코드 |
91.120.20 : 방음. 진동방지
91.060.30 : 천정. 마루. 층계 |
| 페이지수 | 42 |
| Edition | 1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 16283-2:2020 | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation | 2020-07-10 | 표준 |
| 2 | ISO 16283-2:2018 | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation | 2018-05-11 | 구판 |
| 3 | ISO 16283-2:2015 | Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation | 2015-11-13 | 구판 |
ISO 16283-1:2014 - Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation 상세보기
ISO 16283-3:2016 - Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 3: Façade sound insulation 상세보기
ISO 16283-1:2014/Amd 1:2017 - Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation — Amendment 1 상세보기
ISO 16283-2:2020 - Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation 상세보기
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
