관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
| 분야 | ISO/TC 22/SC 32 : Electrical and electronic components and general system aspects |
|---|---|
| 적용범위 | ISO 7637-3:2016 defines bench test methods to evaluate the immunity of devices under test (DUTs) to transient pulses coupled to lines other than supply lines. The test pulses simulate both fast and slow transient disturbances caused by the switching of inductive loads and relay contact bounce. The following three test methods are described in ISO 7637-3:2016: - capacitive coupling clamp (CCC) method; - direct capacitive coupling (DCC) method; - inductive coupling clamp (ICC) method. ISO 7637-3:2016 applies to road vehicles fitted with nominal 12 V or 24 V electrical systems. For transient pulses immunity, Annex B provides recommended test severity levels in line with the functional performance status classification (FPSC) principle described in ISO 7637‑1. |
| 국제분류(ICS)코드 | 43.040.10 : 전기장비 |
| 페이지수 | 25 |
| Edition | 3 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 7637-3:2016 | Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines | 2016-07-01 | 표준 |
| 2 | ISO 7637-3:2007 | Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines | 2007-07-03 | 구판 |
| 3 | ISO 7637-3:1995/Cor 1:1995 | 1995-11-02 | 구판 | |
| 4 | ISO 7637-3:1995 | Road vehicles — Electrical disturbance by conduction and coupling — Part 3: Vehicles with nominal 12 V or 24 V supply voltage — Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines | 1995-07-20 | 구판 |
ISO/DIS 7637-2 - Road vehicles — Electrical disturbances by conduction and coupling — Part 2: Electrical transient conduction along supply lines 상세보기
ISO 7637-0:1990 - Road vehicles — Electrical disturbance by conduction and coupling — Part 0: Definitions and general 상세보기
ISO 7637-2:2011 - Road vehicles — Electrical disturbances from conduction and coupling — Part 2: Electrical transient conduction along supply lines only 상세보기
ISO/TR 7637-5:2016 - Road vehicles — Electrical disturbances from conduction and coupling — Part 5: Enhanced definitions and verification methods for harmonization of pulse generators according to ISO 7637 상세보기
ISO/TS 7637-4:2020 - Road Vehicles — Electrical disturbance by conduction and coupling — Part 4: Electrical transient conduction along shielded high voltage supply lines only 상세보기
ISO 7637-2:2011 - Road vehicles — Electrical disturbances from conduction and coupling — Part 2: Electrical transient conduction along supply lines only 상세보기
ISO 11452-2:2019 - Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Absorber-lined shielded enclosure 상세보기
ISO 11452-8:2015 - Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 8: Immunity to magnetic fields 상세보기
ISO 10605:2008 - Road vehicles — Test methods for electrical disturbances from electrostatic discharge 상세보기
ISO 11452-4:2020 - Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Harness excitation methods 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
