관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
| 분야 | ISO/TC 150/SC 4 : Bone and joint replacements |
|---|---|
| 적용범위 | ISO 14243-3:2014 describes a test method that specifies flexion/extension relative angular movement between articulating components, the pattern of the applied force, speed and duration of testing, sample configuration and test environment to be used for the wear testing of total knee-joint prostheses in wear-testing machines having axial load control, flexion/extension angular motion control, AP displacement control and tibial rotation control. The kinematics of this part of ISO 14243-3:2014 may not be applicable to knee designs with a high degree of constraint, which could result in damage to the articulating components in the early stages of the test that would not be representative of clinical service. |
| 국제분류(ICS)코드 | 11.040.40 : 외과. 보철술. 교정술용 이식 |
| 페이지수 | 16 |
| Edition | 2 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 14243-3:2014/Amd 1:2020 | Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test — Amendment 1 | 2020-01-06 | 표준 |
| 2 | ISO 14243-3:2014 | Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test | 2014-10-13 | 표준 |
| 3 | ISO 14243-3:2004/Cor 1:2006 | 2006-02-06 | 구판 | |
| 4 | ISO 14243-3:2004 | Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test | 2004-09-17 | 구판 |
ISO/CD 14243-4 - Implants for surgery — Wear of total knee prostheses — Part 4: Wear of the patella-femoral joint — Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test 상세보기
ISO 14243-1:2009 - Implants for surgery — Wear of total knee-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test 상세보기
ISO 14243-2:2016 - Implants for surgery — Wear of total knee-joint prostheses — Part 2: Methods of measurement 상세보기
ISO 14243-5:2019 - Implants for surgery — Wear of total knee prostheses — Part 5: Durability performance of the patellofemoral joint 상세보기
ISO 14243-1:2009/Amd 1:2020 - Implants for surgery — Wear of total knee-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test — Amendment 1 상세보기
ISO 14242-1:2014 - Implants for surgery — Wear of total hip-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test 상세보기
ISO 14242-1:2014/Amd 1:2018 - Implants for surgery — Wear of total hip-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test — Amendment 1 상세보기
ISO 14243-2:2016 - Implants for surgery — Wear of total knee-joint prostheses — Part 2: Methods of measurement 상세보기
ISO 14243-3:2014/Amd 1:2020 - Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test — Amendment 1 상세보기
ASTM F3047M-15 - Standard Guide for High Demand Hip Simulator Wear Testing of Hard-on-hard Articulations 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
