관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
| 분야 | ISO/TC 61/SC 4 : Burning behaviour |
|---|---|
| 적용범위 | ISO 5659-2:2006 specifies a method of measuring smoke production from the exposed surface of specimens of essentially flat materials, composites or assemblies not exceeding 25 mm in thickness when placed in a horizontal orientation and subjected to specified levels of thermal irradiance in a closed cabinet with or without the application of a pilot flame. This method of test is applicable to all plastics and may also be used for the evaluation of other materials (e.g. rubbers, textile-coverings, painted surfaces, wood and other materials). It is intended that the values of optical density determined by this test be taken as specific to the specimen or assembly material in the form and thickness tested, and are not to be considered inherent, fundamental, properties. The test is intended primarily for use in research and development and in fire safety engineering of buildings, trains, ships, etc., and not as a basis for ratings for building codes or other purposes. No basis is provided for predicting the density of smoke that may be generated by the materials upon exposure to heat and flame under other (actual) exposure conditions, nor is any correlation established with measurements derived from other test methods. This test procedure excludes the effect of irritants on the eye. |
| 국제분류(ICS)코드 |
13.220.40 : 자재 및 제품의 점화성 및 연소성
83.080.01 : 플라스틱 일반 |
| 페이지수 | 36 |
| Edition | 2 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 5659-2:2017 | Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test | 2017-05-23 | 표준 |
| 2 | ISO 5659-2:2012 | Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test | 2012-11-28 | 구판 |
| 3 | ISO 5659-2:2006 | Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test | 2006-11-29 | 구판 |
| 4 | ISO 5659-2:1994/Cor 1:1997 | 1997-02-27 | 구판 | |
| 5 | ISO 5659-2:1994 | Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test | 1994-12-15 | 구판 |
ISO 5659-1:1996 - Plastics — Smoke generation — Part 1: Guidance on optical-density testing 상세보기
ISO/TR 5659-3:1999 - Plastics — Smoke generation — Part 3: Determination of optical density by a dynamic-flow method 상세보기
ISO 5659-2:2017 - Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test 상세보기
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
