관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
| 분야 | TC 2 : Rotating machinery |
|---|---|
| 적용범위 | IEC 60034-12:2024 specifies the parameters for eight designs of starting performance of single-speed three-phase 50 Hz or 60 Hz cage induction motors in accordance with IEC 60034‑1 that: - have a rated voltage up to 1 000 V; - are intended for direct-on-line or star-delta starting; - are rated on the basis of duty type S1; - are constructed to any degree of protection as defined in IEC 60034-5 and explosion protection. This document also applies to dual voltage motors provided that the flux saturation level is the same for both voltages. This fourth edition cancels and replaces the third edition published in 2016. Aligned with the requirements for explosion protected motors from TC31 WG27 - new clause on methods for measuring locked-rotor current and torque; - new informative annex on the general current and torque characteristics with locked rotor; - new informative annex on correction of voltage and frequency; - aligned with the requirements for explosion protected motors from TC31 WG27. |
| 국제분류(ICS)코드 | 29.160.01 : 회전기계 일반 |
| 페이지수 | 50 |
| Edition | 4.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60034-12:2024 | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors | 2024-05-22 | 표준 |
| 2 | IEC 60034-12:2024 RLV | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors | 2024-05-22 | 표준 |
| 3 | IEC 60034-12:2016 | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors | 2016-11-23 | 구판 |
| 4 | IEC 60034-12:2016 RLV | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors | 2016-11-23 | 구판 |
| 5 | IEC 60034-12:2002+AMD1:2007 CSV | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors | 2007-09-18 | 구판 |
| 6 | IEC 60034-12:2002/AMD1:2007 | Amendment 1 - Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors | 2007-06-21 | 구판 |
| 7 | IEC 60034-12:2002 | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors | 2002-04-09 | 구판 |
| 8 | IEC 60034-12:1980/AMD2:1995 | Amendment 2 - Rotating electrical machines. Part 12: Starting performance of single-speed three-phase cage induction motors for voltages up to and including 660 V | 1995-03-01 | 구판 |
| 9 | IEC 60034-12:1980/AMD1:1992 | Amendment 1 - Rotating electrical machines. Part 12: Starting performance of single-speed three-phase cage induction motors for voltages up to and including 660 V | 1992-10-29 | 구판 |
| 10 | IEC 60034-12:1980 | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors for voltages up to and including 660 V | 1980-01-01 | 구판 |
IEC 60034-2:1972 - Rotating electrical machines. Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) 상세보기
IEC 60034-2A:1974 - Rotating electrical machines - Part 2: Methods for determining losses and efficiency of rotating electrical machinery form tests (excluding machines for traction vehicles) - Measurement of losses by the calorimetric method 상세보기
IEC 60034-10:1975 - Rotating electrical machines. Part 10: Conventions for description of synchronous machines 상세보기
IEC 60034-13:1980 - Rotating electrical machines. Part 13: Specification for mill auxiliary motors 상세보기
IEC 60034-11-2:1984 - Rotating electrical machines - Part 11: Built-in thermal protection - Chapter 2: Thermal detectors and control units used in thermal protection systems 상세보기
ASME B31.2-1968 - Fuel Gas Piping 상세보기
ASME B16.28-1994[폐지] - Wrought Steel Buttwelding Short Radius Elbows and Returns 상세보기
ASTM A513/A513M-24 - Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing 상세보기
ANSI MH28.3-2022 - Design, Testing, And Utilization Of Industrial Steel Work Platforms 상세보기
ANSI MH28.2-2022 - Design And Testing Of Industrial Steel Boltless Shelving 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
