관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Instrument transformers - Part 1: General requirements
| 분야 | TC 38 : Instrument Transformers |
|---|---|
| 적용범위 | IEC 61869-1:2023 is applicable to newly manufactured instrument transformers intended for applications where the nominal voltage is higher than 1 kV AC or 1,5 kV DC, with an analogue or a digital secondary signal for measuring, protection and control purposes, with rated frequencies from 15 Hz to 400 Hz, or for DC applications. The general requirements for instrument transformers for applications in LV systems (nominal voltage = 1 kV AC or = 1,5 kV DC) are covered by IEC 61869-201. This part of IEC 61869 is a product family standard and covers general requirements only. For each type of instrument transformer, the product standard is composed of this document and the relevant specific product standard. This part of IEC 61869 contains the requirements for the limits of the errors both for analogue and digital secondary signal. The other characteristics of a digital interface for instrument transformer are standardised in IEC 61869-9 as an application of the IEC 61850 horizontal standard series, covering communication networks and systems for power utility automation. This part of IEC 61869 considers bandwidth requirements. The accuracy requirements on harmonics and requirements for the anti-aliasing filter are specified in 5.7. IEC 61869-1:2023 cancels and replaces the first edition published in 2007 and IEC 61869-6:2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) merger with IEC 61869-6:2016; b) new scope: equipment for HV applications with a nominal voltage ; 1 kV AC or 1,5 kV DC; c) new classification of some special tests as type tests or routine test; d) additional type tests, additional special tests and new clause for commissioning tests; e) new annexes E, F, G and I. |
| 국제분류(ICS)코드 | 17.220.20 : 전기 및 자기량 측정 |
| 페이지수 | 285 |
| Edition | 2.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 61869-1:2023 | Instrument transformers - Part 1: General requirements | 2023-06-14 | 표준 |
| 2 | IEC 61869-1:2007 | Instrument transformers - Part 1: General requirements | 2007-10-09 | 구판 |
IEC 61869-3:2011 - Instrument transformers - Part 3: Additional requirements for inductive voltage transformers 상세보기
IEC 61869-5:2011 - Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers 상세보기
IEC TR 61869-103:2012 - Instrument transformers - The use of instrument transformers for power quality measurement 상세보기
IEC 61869-2:2012 - Instrument transformers - Part 2: Additional requirements for current transformers 상세보기
IEC 61869-4:2013 - Instrument transformers - Part 4: Additional requirements for combined transformers 상세보기
BS EN 280-1:2022 - Mobile elevating work platforms. Design calculations. Stability criteria. Construction. Safety. Examinations and tests. 상세보기
BS EN 280-2:2022 - Mobile elevating work platforms. Additional safety requirements for load lifting appliances on the extending lifting structure and work platform. 상세보기
ASME BPVC.VIII.1-2023 Section VIII, Rules for Construction of Pressure Vessels, Division 1 상세보기
ASME B31.3-2022 - Process Piping 상세보기
ASME B31.1-2022 - Power Piping 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
